







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Huntington Beach Owner’s Guide
Unilock fence installation in Huntington Beach typically runs $3,500 – $9,000 installed, depending on linear footage, the Unilock wall and pillar system you’re matching, and whether footings need to be re-poured. We install Unilock-compatible fencing and repair failing sections, and we give you a written price before any work starts. Most Huntington Beach owners discover the problem the same way: a pillar cap shifts after a Santa Ana wind event, a wall course starts leaning toward the alley, or a post that felt solid in spring now rocks when you push it. That rocking is usually water in the footing, not the block itself.
We’re an independent contractor and not affiliated with Unilock. We work to Unilock’s published specs and match their profiles, and we tell you plainly when a repair makes more sense than a replacement.
Key Takeaways
- Installed Unilock fence work in Huntington Beach: $3,500 – $9,000.
- Written price before work starts, backed by our 365-Day Done Right Promise.
- Salt air and marine layer are the two biggest enemies of a Huntington Beach fence wall.
- Background-checked, uniformed technicians on every job, and a live person answers the phone 24/7.
Which Unilock Models This Applies To

Unilock builds its retaining and freestanding wall systems around a handful of product families: the standard segmental block lines, the tumbled and textured faces, and the pillar and cap systems that sit on top. Fence installation usually means a freestanding wall built to a specific height with pilasters at set intervals, capped, and often finished with a matching pier or column at gate posts. The compatibility question is rarely the block face; it’s the cap profile and the pillar geometry. Caps from one Unilock wall series don’t reliably seat on another, and a mismatched cap is the number one reason a cap lifts and lets water in.
To identify what you have, measure the exposed face of a single block (width, height, depth to the nearest eighth of an inch), then measure the cap overhang and its corner radius. Pull a loose cap and look for the molded mark on the underside. Photograph all of it. A supplier can match a block by profile and dimension far faster than by name, and Huntington Beach owners rebuilding a partial run often find the original series is still in production while the cap is not.
On OEM versus aftermarket: for structural block and load-bearing courses, stay with the original manufacturer’s spec. For caps, pier inserts and non-structural trim, a quality aftermarket equivalent in the same dimension is fine and often much less money. We source through recognized trade suppliers, the same way we source Belgard and Unilock hardscape materials, Cambria and Silestone for interiors, and KraftMaid cabinetry when a project moves inside.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
Most Huntington Beach fence walls fail slowly and then all at once. Here’s what to look for, and what each symptom actually means:
- Pillar caps lifting or sitting crooked. Adhesive breaks down under UV and salt air, and once a cap lifts, rain and marine moisture get straight into the core. A lifted cap is a five-minute fix if you catch it early and a footing problem if you don’t.
- A course leaning out of plumb. Usually a footing that was undersized or set on disturbed soil, made worse by our wet winters. A 1/4-inch lean over four feet is worth watching; past that, it’s moving.
- Efflorescence, the white chalky bloom on the face. Normal in small amounts on new block, but heavy recurring bloom on the same area points to water moving through the wall from behind, not surface splash.
- Loose or rocking posts at gate piers. Gate posts take more load than any other point in the run. When one rocks, the footing has lost bearing, and a gate hanging on it will only accelerate the failure.
- Visible cracks at the mortar joints or block splits. Freeze-thaw is rare here, but thermal cycling between cool marine nights and hot afternoons is real, and a crack that widens season to season means the wall is working.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Huntington Beach runs $3,500 – $9,000 for Unilock-compatible work. That range covers footings, block, caps, adhesive and finish, and it moves based on linear footage, wall height, the number of pilasters, and whether the old footing has to come out.
| Line item | Typical range |
|---|---|
| New footing excavation and pour (per post) | $250 – $600 |
| Block wall, installed (per linear foot) | $55 – $130 |
| Pillar and cap assembly (each) | $300 – $750 |
| Removal and haul-away of failed wall | $400 – $1,200 |
| Full replacement, average run | $3,500 – $9,000 |
What drives the number up: removing a footing that was set too shallow, adding drainage behind the wall, or matching a series that’s no longer in production. What drives it down: reusing sound footings and capping a short run. You get a written, line-item price before work starts, and the number on day one is the number on the invoice. Every repair carries our written guarantee and the 365-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself. Walk the run and look for gaps under caps. Push each post at the top with moderate force and note any movement. Look for efflorescence concentrated in one spot versus spread evenly. Take photos and measurements of blocks and caps. That’s information gathering, and it makes the estimate faster.
Rebuilding a wall or re-setting a footing is where it goes past a homeowner job. A freestanding block wall carries real weight, and a footing that fails while you’re working on it is a genuine injury risk. Block adhesive and cap work also depends on clean, dry surfaces and the right cure time, which is why a swap done in a hurry often lifts again within a season. If your wall is leaning or a pillar is moving, have it looked at before you build anything against it.
Call (888) 329-8145 and we’ll look at it and give you a written price. Estimates are free, and a live person answers any hour.
FAQs

A properly built Unilock-compatible wall should last 30 years or more here, but the cap and footing decide it. Salt air breaks down cap adhesive faster than inland, and our marine layer keeps block damp longer, so caps and drainage need attention every few years. Call (888) 329-8145 for an exact quote on your run; estimates are free.
Often, yes. A lifted cap, a single cracked block or a loose gate post is a repair, not a rebuild, and it’s typically the cheaper and faster call. A wall that’s leaning past a quarter inch over four feet or has lost its footing usually needs a section replaced. We’ll tell you which one you’re looking at in writing.
A cap and pillar repair is usually done in a day. Rebuilding a section with new footings takes two to four days depending on cure time and how much old wall has to come out. We give you a defined arrival window and a written schedule before we start, and background-checked, uniformed technicians show up in that window.
By dimension and profile, not by name. We measure the block and cap, photograph the molded mark, and match the part through recognized trade suppliers. If the original series is discontinued, we’ll show you the closest compatible match and explain the difference before you decide. Call (888) 329-8145 to get that process started.
We work under The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. That’s the standard on every Huntington Beach job, backed in writing by our 365-Day Done Right Promise and a free return visit if a repair fails.
Call (888) 329-8145 for a free estimate on your Unilock fence installation in Huntington Beach. A live person answers 24/7, and you’ll have a written price in hand before any work begins.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












