







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Westminster, CA
We’re an independent Tremron paver and hardscape installer working throughout Westminster, CA, and the one thing that separates our Tremron work here is the base, not the color. Westminster’s post-war tract stock sits on original slabs, old patio enclosures and former carports, so the drainage and edge restraint under a Tremron driveway or patio matter far more here than they do on fresh ground. We’re not the manufacturer and we’re not an authorized Tremron dealer; we’re a local installer who picks the right series, preps the sub-base and sets it so the field stays put. Call (888) 329-8145 for a free estimate.
Tremron Service in Westminster: Why Local Homeowners Choose Us

We know the Tremron line down to the series: Olde Towne and Olde Towne Cobble for that tight, classic paver field; Weston Stone for retaining walls where a lot needs to hold back a slope; Marina and Biscayne for the barrel-profile look on patios and walkways; Capri and Capri Stepping Stone for a lighter, more open layout. We also know how each one behaves on the ground Westminster actually has.
The homeowner in 92683 who calls us is usually frustrated by something specific: sand washing out after a couple of Santa Ana seasons, pavers rocking at the driveway apron, a white bloom creeping across the joints. We show up when we say we will, background-checked and in uniform, and we give you a written price before anyone lifts a paver. Our technicians have up to 22 years of experience, and every Tremron job we install carries our 365-Day Done Right Promise – if the work fails, we come back and fix it at no charge, in writing.
That’s the whole difference. Tremron makes a solid paver. Getting it to stay level through a Westminster summer and a damp winter is the part that requires a local installer who has seen what fails here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Tremron Construction Problems We Solve in Westminster
These are the failure modes we actually see on Tremron installation and repair work around Westminster, and each one traces back to something local:
- Polysand joint failure after wind and washing. Santa Ana wind events drive grit into the seams, and repeated pressure washing blasts the polymeric sand out. Once the joints open, pavers shift and weeds find the gaps. We re-sand with polymeric joint sand matched to the Tremron series rather than a mismatched aftermarket bag.
- Efflorescence on gray and charcoal pavers. The coastal marine layer pushes damp air inland, and moisture wicks up through an under-drained sub-base, leaving white powdery streaks across the surface. On Westminster’s older lots this usually points back to a base laid without positive fall, not a bad paver.
- Edge restraint failure on driveways poured over the original post-war slab. This is the classic one. The paver field creeps toward the street, and you get lipping and rocking right at the apron because the edge was never anchored properly to the old concrete.
- Color fading on inland-facing patios. The sun load on the east side of Westminster runs higher than on the coastal side of town, and UV wears down the surface sheen on sun-exposed Tremron patios faster than homeowners expect. We match color and finish when we replace an isolated section so the repair blends.
- Heaved or settled fields over patio enclosures. When a former enclosed patio or carport becomes a finished hardscape area, the old slab underneath often has no designed slope, so water sits. Lifting and re-laying the affected course, re-grading the base and resetting the restraint fixes it without tearing up a sound driveway.
What Westminster’s Remodel Pattern Means for Your Tremron Hardscape
Westminster isn’t a teardown town. Most of the housing stock here is 1950s and 1960s single-story stucco tract on small lots, and when families expand, they enclose patios, convert garages to living space and add second units rather than starting over. In the Little Saigon neighborhoods especially, that pattern is everywhere – multi-generational households adding a second living area, a converted garage, a back patio turned into the place everyone actually gathers. The catch is that those patios frequently get laid over old slabs and former carport pads whose drainage slope was never designed for a finished hardscape in the first place. That’s why, on a Westminster job, we spend more time on the sub-base and the fall than on picking the paver color. Get the base and the drainage right and a Tremron field will sit for twenty years. Skip it and you’re re-sanding every other spring.
Tremron Models and Products We Install in Westminster
We work across the Tremron paver and wall lines: Olde Towne and Olde Towne Cobble for driveways and walkways, Weston Stone retaining wall blocks where a lot needs to hold a grade, Marina and Biscayne barrel profiles for patios, and Capri and Capri Stepping Stone for stepping-stone paths and open layouts. We select the series to match the load and exposure the surface will actually face, and we use Tremron-compatible edge restraints, polymeric joint sand and base aggregate matched to that series rather than whatever’s on the shelf. We don’t claim to stock Tremron parts locally; we source what each job needs and bring it to the site. Where a failure is isolated, we lift and re-lay the affected field rather than tear up a driveway that’s otherwise sound.
See the difference
Before
After
Before
After
Before
AfterTremron Paver Pricing in Westminster

Here’s what our Tremron paver work typically runs in the Westminster market. These are real ranges, not a teaser number that grows after demo day:












