







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Huntington Beach Owner’s Guide
If you’re searching because a Tamko product in your kitchen has failed or is on its way out, here’s the short answer: we handle Tamko-compatible kitchen remodeling and component replacement in Huntington Beach, and a full kitchen remodel typically runs $14,000 – $45,000 depending on layout, cabinet line and countertop material. Smaller scoped work (a cabinet run, a countertop swap, a backsplash) lands well under that. We schedule planned work into a real arrival window rather than promising same-day turnarounds, because a kitchen isn’t a repair call.
Most Huntington Beach owners don’t go looking for this until something gives. A cabinet door that won’t sit flush anymore. A countertop seam that’s started to lift near the sink. A backsplash grout line that keeps cracking no matter how many times it’s patched. That’s usually the moment the questions start: what exactly is behind this, what’s the right replacement, and who can put it back correctly the first time.
Key takeaways:
- Tamko-compatible kitchen work in Huntington Beach runs $14,000 – $45,000 for a full remodel; smaller components are far less.
- Every job gets a written price before work starts, and it’s the number on the invoice.
- Backed by the 365-Day Done Right Promise, in writing, on every project.
- Background-checked, uniformed technicians on every job.
Which Tamko Models This Applies To

Tamko is best known for roofing and waterproofing products, and that matters in a kitchen more than people expect, because the membrane and underlayment behind tile and under cabinet bases is where a lot of failures actually start. If your project involves Tamko waterproofing or underlayment components, the compatibility details live on the product label and the packaging, not in a model number you can guess at. Before we quote anything, we identify what’s actually installed: pull the label, measure the substrate thickness, and match the replacement to the assembly rather than to a photo on a website.
Here’s the OEM-versus-aftermarket decision in plain terms for Tamko specifically. An OEM Tamko component matches the original assembly exactly, which matters when you’re tying into an existing waterproofing layer and can’t afford a thickness mismatch. A quality aftermarket equivalent can cost less and perform just as well, but only when the spec range lines up. Get that wrong and you’re back to the same failure in a year. We source replacement materials from recognized trade brands, and we tell you which way we’re going and why before we order.
To be clear about who we are: Penhallow Remodeling Huntington Beach is an independent remodeling company, not affiliated with Tamko. We work with Tamko-compatible assemblies as part of kitchen remodeling, alongside KraftMaid, Cambria and Silestone products when the job calls for them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
Five symptoms Huntington Beach owners tend to notice first, and what’s usually underneath each one:
- Grout lines that keep cracking along a backsplash or floor. That’s movement, not bad grout. Either the substrate behind the tile has shifted or the waterproofing layer wasn’t tied in correctly at the start.
- A soft or slightly spongy spot near the sink base or dishwasher. Water has been getting past the membrane for a while. By the time it feels soft, the cabinet base underneath is usually already compromised.
- Cabinets that won’t stay level or doors that drift out of alignment. Often a substrate or underlayment issue rather than the cabinet itself, especially in older Huntington Beach homes where the subfloor has taken on moisture over the years.
- Countertop seams lifting or darkening near the edges. Moisture wicking up through a failed barrier. Quartz and other surfaces are unforgiving once the base underneath moves.
- A musty smell that won’t clear, even after cleaning. Trapped moisture in the assembly. This one is worth looking at sooner rather than later, because coastal humidity speeds up what’s already started.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Huntington Beach, here’s what the numbers actually look like. A full kitchen remodel runs $14,000 – $45,000. A small kitchen remodel runs $9,000 – $20,000. Individual components land where you’d expect: cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, and a kitchen island $3,000 – $10,000.
What drives the range up or down is the same list every time: layout changes, cabinet line (a stock line versus a semi-custom KraftMaid run is a real jump), countertop material (Cambria quartz sits higher than a laminate, and carries its own manufacturer warranty alongside ours), and how much repair sits under the surface once we open things up.
Every homeowner gets a written, line-item price before any work starts. Not a range, not a verbal ballpark. If the number changes after demo, that’s a conversation we have with you before proceeding, never a surprise on the invoice. And the work carries a written guarantee on top of it.
DIY or Call Us?
Some things you can safely check yourself. Look for the product label on the Tamko component, measure the substrate thickness, and note where the failure is happening. Take photos. That’s genuinely useful information and it helps us quote accurately.
What we’d steer you away from is pulling apart a waterproofing assembly or a tile field to “see what’s underneath.” Once you open a membrane, you own the repair, and a partial reinstall usually fails faster than what you started with. Kitchens hide structural and moisture problems that don’t show until the assembly is open and inspected properly.
Call (888) 329-8145 and we’ll book a free estimate, give you a written price, and tell you honestly whether you’re looking at a component swap or something bigger.
FAQs

Waterproofing and underlayment assemblies typically hold up well for 15 – 25 years when installed correctly and kept dry. Coastal humidity in Huntington Beach shortens that if moisture gets behind the assembly, so a properly tied-in install matters more here than in drier inland climates.
Sometimes. Small, isolated failures can often be patched if the surrounding assembly is still sound. Larger areas, or anything involving a compromised cabinet base or subfloor, usually need the section replaced. We’ll tell you which one you’re looking at before you commit to anything.
A component-level replacement can be a day or two. A kitchen remodel involving cabinetry, countertops and backsplash runs one to three weeks depending on scope and material lead times. You’ll get a real timeline in your written quote, not a guess.
We identify the exact assembly from the label and measurements, then source either the OEM component or a spec-matched quality equivalent, whichever fits the job. We tell you which and why before ordering. Estimates are free, so call (888) 329-8145 for an exact quote.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












