A Penhallow company - serving Huntington Beach, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Huntington Beach

Schluter Home Additions & ADU in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
A small remodeled galley kitchen with cabinets to the ceiling
A finished basement family room with a media wall and wet bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Huntington Beach Owner’s Guide

We install Schluter-compatible home additions and ADU projects in Huntington Beach, and a typical addition runs $45,000 – $130,000 while a full ADU runs $90,000 – $220,000 depending on square footage, foundation work, and finish level. If you’re here because a part failed, you’ve likely found it the same way most owners do: a hairline crack working its way across a floor tile, a grout joint that keeps opening up, or a soft spot near a shower curb that never quite dries. In an addition or ADU, the failure shows up months after the pour and framing, when the slab has already moved through its first wet and dry cycle.

Call (888) 329-8145

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter isn’t one product. It’s a family of uncoupling membranes, waterproofing systems, profiles, and shower components, and the part number tells you which one you’re holding. The common lines homeowners bring us are DITRA and DITRA-HEAT (uncoupling membrane for tile floors), KERDI (sheet-applied waterproofing for showers and wet areas), KERDI-BOARD (the cement backer panel), SCHIENE and QUADEC (edge profiles), and DITRA-HEAT thermostat and cable components if your addition has heated floors.

To identify the right part, check the printed band along the membrane edge or the stamp on the profile – Schluter prints the product name and often the roll width directly on the material. DITRA comes in 3’3″ and 1-meter widths, and the sizing matters: splicing two narrower rolls where one wide roll was specified is a common reason seams fail. KERDI-BOARD panels are sold in fixed thicknesses, so matching the existing thickness to the new panel is what keeps your shower tile plane flush. For OEM versus aftermarket, Schluter’s own system parts are worth staying with on anything inside a wet area, because the warranty on a Schluter-assembled shower depends on using Schluter’s own components together.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

These are the five symptoms we get called about most often on Huntington Beach additions and ADUs, and each one points at a specific cause.

  • Grout cracking in a straight line across the floor. This usually means the membrane beneath has debonded or the tile was set directly to slab without uncoupling, so the tile is moving with the concrete. In an addition, the new slab and the existing house slab move at different rates through the seasons.
  • Tiles that sound hollow when you tap them. A hollow tap means the thinset didn’t bond fully to the membrane or the membrane didn’t bond to the substrate. Heat and traffic loosen it further until a tile lifts.
  • Water staining or a damp smell near the shower or tub edge. KERDI seams that weren’t overlapped correctly, or a corner band that failed, let moisture past the waterproofing. In a Huntington Beach ADU with an exterior shower wall, the marine air and morning fog make a small seam failure worse fast.
  • Lippage – one tile edge sitting higher than its neighbor. This often traces to the tile being laid over a membrane with trapped air pockets or an uneven substrate rather than a properly bedded one.
  • Heated floor zones that stopped warming evenly. On DITRA-HEAT systems, a cable nicked during tile removal or a loose thermostat connection is the usual cause, and it’s a wiring fault rather than a tile problem.

Replacement Cost & What’s Included

An open living space after a whole-home remodel

For Huntington Beach, the ranges we quote on this kind of work are the same numbers we put in writing. An addition typically runs $45,000 – $130,000 and an ADU runs $90,000 – $220,000, with the wider end of each driven by foundation engineering, square footage, roof tie-in complexity, and the finish level you choose.

When a specific Schluter component has to be replaced mid-project, the cost depends on what’s above it. A failing KERDI membrane in a shower means removing tile, replacing the sheet and seams, and re-tiling – that’s a shower-scope job, which is $4,500 – $12,000 for a walk-in shower. A failed DITRA-HEAT cable means pulling tile in that zone only. Your written quote breaks out the part, the labor, and any material disposal so you can see the line items. The 365-Day Done Right Promise covers the work in writing: if the repair fails inside the year, we return and fix it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself. Look for the printed Schluter band on the membrane edge to confirm what you have. Tap tiles with a plastic-handled tool to map which areas sound hollow. Check your thermostat or valve settings if a heated zone is cold. And photograph any cracks or moist spots before you do anything else.

Where DIY goes wrong is at the waterproofing and slab-bond layer. A membrane laid over a damp or dusty slab won’t hold, and a KERDI seam that looks fine the day you finish it is exactly where water finds a path months later. These aren’t dangerous the way electrical or gas work is, but they’re unforgiving, and redoing them means destroying the finished tile. If tapping or a moisture stain has you worried, call us at (888) 329-8145 and we’ll look at it. Estimates are free.

Frequently Asked Questions

A second-story addition that matches the existing roofline

Contact Us for a Free Estimate

If a Schluter part has failed in your Huntington Beach addition or ADU, we’ll come out, look at it with you, and put a written price in front of you before any work starts. Our quotes are line-item and fixed, our technicians arrive background-checked and in uniform, and a real person answers the phone any hour. We draw project materials from names like KraftMaid, Cambria, and Silestone alongside Schluter’s system components. Call (888) 329-8145 for your free estimate.

Penhallow Remodeling Huntington Beach is an independent remodeling company and is not affiliated with Schluter. Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA walk-in pantry with wood shelving

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 329-8145
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Penhallow Remodeling Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch