







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Huntington Beach Owner’s Guide
Schluter bathroom remodeling in Huntington Beach typically runs $9,000 – $28,000 when we’re rebuilding a shower or wet area with a Schluter waterproofing membrane, drain, and trim system, and most planned projects like this get a written price before demo starts. You usually find out something failed by touch: a soft or hollow patch at the shower curb, a grout joint that keeps crumbling, a flexing shower floor, or a hairline crack that comes back two weeks after you caulk it. By the time water shows up on the ceiling below, the membrane has been letting moisture through for a while.
Which Schluter Models This Applies To

Schluter is a family of systems, not one product, and the right part depends on which one is under your tile. Kerdi-Board and Kerdi membrane are the most common waterproofing layers in Huntington Beach bathrooms we open up. Kerdi-Line and Kerdi-Drain are the linear and point drains. Ditra and Ditra-Heat sit under the floor tile. And the trim lines (RONDEC, QUADEC, JOLLY, SCHIENE) finish the edges.
To identify what you have, don’t guess from a photo. Pull the escutcheon at the shower valve and check for the printed membrane label, measure the drain grate’s exact length and width in millimeters, and note whether the drain flange is round or a linear channel. Schluter sizes are metric, and a US-bought grate won’t drop into a metric frame just because it looks close.
On the OEM-vs-aftermarket call: for anything your insurance or resale depends on, use the genuine Schluter component that matches the system already installed. Mixing brands at the drain assembly is the most common reason a “fixed” shower leaks again in a season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- A soft, spongy shower floor. Water has been sitting under the tile and the substrate (the board behind the waterproofing) has softened. This usually traces to a bond break at the drain flange.
- Grout cracking in a repeating line. That’s movement, not bad luck. It often points to a missing or thin movement joint along the wall-to-floor junction.
- Water stains on the ceiling below. The waterproofing layer has a gap, often at a niche or the curb. This one needs to be opened and found, not patched from underneath.
- Loose or popping trim profiles. The RONDEC or QUADEC edge has separated from the tile or wall, usually because the thin-set dried before the profile was set.
- Musty smell after every shower. Moisture is trapped behind the barrier and can’t dry out. This is the slow one, and the most expensive to ignore.
In Huntington Beach, we see a lot of curb-built showers from the last decade where the outside corner of the curb was never reinforced. Coastal humidity and strong sun through a west-facing window work on the same joint from both sides, and it fails early.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers land for Huntington Beach work, installed:
| Scope | Installed range |
|---|---|
| Full bathroom remodel using Schluter waterproofing | $9,000 – $28,000 |
| Walk-in shower rebuild | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement (same footprint) | $3,000 – $8,500 |
What drives the range: tile choice, whether the drain has to be relocated, and how much of the substrate needs replacing. You get a written, line-item price before any work starts. That number doesn’t move once the job is in motion unless you add scope. The finished installation carries our 365-Day Done Right Promise in writing.
DIY or Call Us?
You can safely check a few things yourself. Look for recurring grout cracks, press along the shower floor for soft spots, and note the drain grate dimensions. That’s diagnostics, and it’s useful.
What you don’t want to do yourself is tear into the waterproofing layer. That’s the part holding back months of standing water. Cutting into a Schluter membrane to “take a look” is the single most common way a small, findable leak becomes a full shower rebuild. Tiling a shower is a days’ work with carefully staged set times and no room for error once the membrane is pierced. If your investigation turns up a soft spot or a stain below the floor, call (888) 329-8145 and we’ll look at it.
FAQs

How long does a Schluter bathroom floor last? Twenty-five to fifty years in a properly installed, well-ventilated Huntington Beach bathroom, but the membrane only lasts that long if the drain and corners were installed and flashed correctly in the first place. That’s the part people skip.
Can the failed part be repaired instead of replacing the whole shower? Sometimes. A single failed trim profile or a single cracked grout line can be fixed without a tear-out. Once water has reached the substrate, repair isn’t viable.
How long does a Schluter shower replacement take? Usually one to two weeks of working days for a full wet-area rebuild. A same-footprint swap can run shorter. We’ll give you a written schedule with your price.
How do you source the part? We specify the genuine Schluter component matched to your existing system and order it for the job. We don’t stock parts or carry them on a truck. That way you get exactly the right part, not whatever’s on hand.
Penhallow Remodeling Huntington Beach is an independent service provider and isn’t affiliated with Schluter. We also install KraftMaid cabinetry and Cambria quartz, which carry their own manufacturer warranties alongside ours.
Call (888) 329-8145 for a free estimate on your Huntington Beach Schluter bathroom. We’ll give you a written price before any work starts.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












