







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Huntington Beach Owner’s Guide
PGT kitchen remodeling in Huntington Beach typically runs $14,000 – $45,000 installed, depending on layout, cabinet line and countertop material, and we give you that number in writing before any work starts. If you’re here because something PGT-tied in your kitchen has failed – a cabinet door that won’t stay shut, a drawer that grinds, a countertop seam that’s opened up – you’re in the right place. Most Huntington Beach owners we meet found the problem the same way: a soft close stopped closing, or a hinge pulled loose from the frame, and by the third week it was something they noticed every single morning. We install and repair to PGT-series specifications and tell you honestly whether you’re looking at a part swap or a broader fix. Call (888) 329-8145 for a free estimate.
Which PGT Models This Applies To

PGT builds to several series lines, and the cabinet and hardware specs shift between them – drawer glide ratings, hinge bore patterns, and the panel thickness your carcass was cut for all differ by series. The fastest way to identify what you have is the label inside the cabinet door or on the back of a drawer box: it lists the series and the box dimensions. Measure the existing part before you order anything. A glide rated for a 24-inch box will not carry a 30-inch pot drawer without sagging, and that mismatch is the single most common mistake we correct in Huntington Beach kitchens.
On the OEM-versus-aftermarket question, PGT-specific: genuine PGT replacement hardware guarantees a drop-in fit for your series, which matters on frameless boxes where the bore pattern is unforgiving. Quality aftermarket equivalents cost less and work fine on standard-hinge applications, but check the load rating and the bore spacing against your label before you commit. We source from recognized trade brands – KraftMaid, Cambria and Silestone among them – and we’ll tell you plainly when an aftermarket part is the smarter buy and when it isn’t. Penhallow Remodeling Huntington Beach is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
- A soft-close door that slams or drifts open. The damper cartridge inside the hinge has worn out – it’s a wear part, not a defect, and it fails faster in kitchens with heavy daily use.
- Drawers that grind or stick halfway. The glide rollers have flat-spotted or the track has picked up grit; once the rollers deform, no amount of cleaning brings the smooth pull back.
- Hinges pulling away from the frame. Screw holes in the cabinet side have stripped, usually from a door that was over-loaded or hung slightly out of alignment for months.
- A countertop seam that’s opened or darkened. The seam adhesive has failed or moisture has worked in – common along sink runs where splash exposure is constant.
- Cabinet doors that no longer sit flush. The carcass has shifted, often from a floor that moves with seasonal moisture, which throws every door and drawer on that run out of alignment at once.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Huntington Beach homeowners actually pay for the work, installed:
| Work | Installed range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number up or down: the cabinet line you choose, whether the layout moves (plumbing and electrical relocation adds real labor), and countertop material – Cambria quartz sits at the top of that range, laminate at the bottom. Your written price covers parts and labor together, and it’s the number on the invoice. Every project carries our 365-Day Done Right Promise in writing, plus a free return visit if a repair fails – no service call fee, no re-inspection charge.
DIY or Call Us?
You can safely check a few things yourself: read the series label inside the door, measure the box, test whether the hinge screws still bite, and photograph the failed part before you touch it. Where DIY goes wrong is the swap itself. Replacing glides or hinges on a frameless PGT box means matching bore patterns exactly – drill a new hole 2mm off and the door hangs crooked for good, and stripped screw holes in a cabinet side are much harder to fix once you’ve enlarged them.
One honest safety note: if your repair touches the electrical run behind the cabinets, or the gas line to the range, stop. Those are not homeowner jobs. Call a trained professional. For the parts and install side, call Penhallow Remodeling Huntington Beach at (888) 329-8145 and we’ll give you a written price before we start.
FAQs

Expect 10 – 15 years from glides and dampers under normal use, and closer to 7 – 10 in a coastal kitchen where salt air accelerates corrosion on exposed metal. Humidity swings near the beach shorten that further. If your hardware is past that window and failing in more than one spot, replacing the run makes more sense than chasing individual parts. Call (888) 329-8145 for an exact quote – estimates are free.
Sometimes, yes. A loose hinge can often be re-seated with a longer screw and the door rehung; a single damper cartridge can be swapped without touching the rest. Once rollers have flat-spotted or a cabinet side has stripped through, replacement is the honest answer. We’ll tell you which one you’re looking at before any work starts. Call (888) 329-8145 to schedule your free estimate.
A hardware and glide replacement on a standard run is usually a single-day job; a full cabinet or countertop replacement runs several days to a couple of weeks depending on scope. You’ll get a defined arrival window and a written completion estimate up front. Call (888) 329-8145 and we’ll talk through your timeline – a live person answers, day or night.
We start from the series label and box measurements, then order the correct-spec hardware – OEM where fit is unforgiving, quality aftermarket where it isn’t. We don’t claim to stock parts or carry them on a truck; we source what your PGT series actually needs. Every install is background-checked, uniformed technicians, with a written guarantee on the work. Call (888) 329-8145 for a free estimate.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












