







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The Huntington Beach Owner’s Guide
CertainTeed kitchen remodeling in Huntington Beach typically runs $14,000 – $45,000 installed, depending on layout, cabinet line, and countertop material, and we schedule these as planned projects with a written price before demolition begins. CertainTeed is best known here for its gypsum wallboard, fiber cement siding, and insulation, so most Huntington Beach owners who call us aren’t replacing a “CertainTeed kitchen” as a single product; they’re repairing or rebuilding a kitchen where CertainTeed backer board, drywall, or moisture-resistant panels have failed behind tile, under a sink, or along an exterior wall. You usually find out when a tile pops loose, a soft spot appears under the sink cabinet, or a seam in the drywall above the backsplash starts to bubble. Our technicians have up to 22 years of experience reading exactly those failure patterns.
Which CertainTeed Models This Applies To

CertainTeed makes several board products that end up in Huntington Beach kitchens, and the right replacement depends on which one you have. The most common are CertainTeed’s gypsum backer board for tile (often sold under its tile underlayment lines), mold-resistant drywall (the purple or green paper-faced panels, depending on the line), and fiber cement products used on exterior walls that abut a kitchen. The identifying label is printed on the board’s face or edge tape: look for the product name, thickness (usually 1/2 inch or 5/8 inch), and any mold- or moisture-resistance designation. Measure the panel thickness with a tape before you order anything, because a 1/2-inch board will not match a 5/8-inch substrate and your tile plane will be off.
Here’s the compatibility gotcha that trips up DIY buyers: CertainTeed’s backer board and its mold-resistant drywall are not interchangeable, and neither is a substitute for cement board in a wet zone like a shower-adjacent wall or a sink backsplash. The screws matter too. CertainTeed specifies coated or galvanized screws at a set spacing, and standard drywall screws will rust and pop within a couple of seasons in Huntington Beach’s coastal humidity. We source the correct board and fasteners for each application rather than swapping in whatever’s on the shelf. Penhallow Remodeling Huntington Beach is an independent remodeling company, not affiliated with CertainTeed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Kitchen Remodeling Is Failing
- Tile lifting or hollow-sounding underfoot. This usually means the backer board behind the tile has absorbed moisture and lost its bond, common around sinks and along exterior walls where coastal damp works in.
- Soft or crumbling drywall under the sink. A slow supply-line or drain leak saturates the panel, and mold-resistant drywall resists mold but not standing water. By the time it feels soft, the cabinet base is often wet too.
- Bubbling or peeling paint above the backsplash. Moisture is migrating through the wall assembly, and the paper face of the drywall is separating. This points to a vapor or flashing problem, not just a paint failure.
- Visible mold or a musty smell near the counter. CertainTeed’s mold-resistant board slows surface mold but won’t stop a persistent leak behind it. The smell usually means the source is still active.
- Cracks along seams and corners. Movement or water swelling has stressed the joints, and in Huntington Beach’s temperature swings between morning marine layer and afternoon sun, a poorly fastened panel will telegraph through the finish.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a kitchen project that involves replacing failed CertainTeed board behind tile, under cabinets, or along a wall, our Huntington Beach installed ranges break down like this. A small kitchen remodel with substrate repair runs $9,000 – $20,000. A full kitchen remodel runs $14,000 – $45,000, which is the lead range for this page. Cabinet installation alone runs $4,000 – $13,000, countertop installation $2,000 – $6,500, and backsplash installation $800 – $2,500. If we’re adding or rebuilding an island, that’s $3,000 – $10,000.
What drives the number up or down: how much board has to come out, whether the leak source needs repair before we rebuild, and the finish materials you choose. We give you a written price before any work starts, itemized so you can see the substrate repair separate from the tile and cabinetry. Every project carries our 365-Day Done Right Promise, which means if something we installed fails inside the year, we come back and fix it at no charge.
DIY or Call Us?
Some of this is genuinely safe to check yourself. You can pull the cabinet base and look for staining, press a screwdriver into the drywall to test for softness, run a hand along the backsplash for loose tile, and check under the sink for drips. That’s diagnosis, and it costs nothing.
Where DIY goes wrong is the repair. Removing backer board without disturbing the tile field, matching panel thickness so the new tile sits flush, and re-flashing a wall so the same leak doesn’t return are the parts that fail when a homeowner does it alone. We’ve re-done plenty of Huntington Beach kitchens where a well-meaning patch looked fine for two months and then cracked. If you smell mold or see active water, stop and call a professional, because a hidden leak behind a wall is a bigger problem than the visible board. Call (888) 329-8145 and we’ll walk you through what we see.
FAQs

How long does CertainTeed backer board and mold-resistant drywall last in a Huntington Beach kitchen? A correctly installed panel in a dry, well-ventilated kitchen lasts as long as the tile or finish in front of it, often 20 years or more, but a board that stays wet fails in as little as a few months. In Huntington Beach’s coastal air, the moisture source matters more than the product’s rating. Call (888) 329-8145 for an exact assessment; estimates are free.
Can it be repaired instead of replaced? Sometimes, yes. A small section of failed panel can be cut out and patched if the surrounding board is sound and the leak is fixed first. Larger areas of softness or spreading mold usually mean replacing the whole wall section, and that’s a call we make after looking at it. Call (888) 329-8145 to schedule your free estimate.
How long does the swap take? A patch and re-tile on a small section can be a one-day job, while rebuilding a kitchen wall behind cabinets and countertops typically runs several days to a couple of weeks depending on finish work. You’ll get a written schedule and a real arrival window before we start, not a vague “sometime next week.” Call (888) 329-8145 for a timeline on your specific kitchen.
How do you source the correct CertainTeed part? We identify the product line and thickness from the board’s label and measurements, then source the matching board and specified fasteners for the application. We also work with KraftMaid, Cambria, and Silestone when a project calls for cabinetry or countertops alongside the repair. Call (888) 329-8145 and we’ll confirm the right materials for your kitchen.
If you’re in Huntington Beach and dealing with failed board, a soft spot, or a backsplash that’s started to lift, the cheapest move is getting a real number instead of guessing. Call Penhallow Remodeling Huntington Beach at (888) 329-8145 for a free estimate. A live person answers around the clock, you’ll get a written price before any work starts, and every job is backed by our 365-Day Done Right Promise. The number on day one is the number on the invoice.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












