







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Huntington Beach Owner’s Guide
If you have CertainTeed pavers or a CertainTeed paver driveway and something has failed – a cracked unit, a settled edge, a joint that won’t hold sand – we install CertainTeed-compatible driveway and paver systems across Huntington Beach, and a repair or partial replacement typically runs $700 to $3,200 depending on square footage and the cause of the failure. Full paver driveway installations here run $7,000 – $18,000. We keep a real arrival window and give you a written price before any work starts.
Owners usually find the problem the same way: a paver lifts underfoot near the garage apron, sand washes out of the joints after a winter rain, or a hairline crack appears along a unit that sits over the driveway’s low spot. In Huntington Beach, the discovery often comes after the first heavy rain of the season, when water that pooled under the base finally pushed a unit up.
Key Takeaways
- CertainTeed paver failures in Huntington Beach are usually a base or drainage problem, not the paver itself.
- Repairs run $700 – $3,200; full paver driveways run $7,000 – $18,000.
- We are an independent contractor, not affiliated with CertainTeed.
- Every job gets a written price up front and a 365-Day Done Right Promise.
Which CertainTeed Models This Applies To

CertainTeed’s hardscape lineup is smaller than its roofing and siding catalog, and that trips people up. When you search for a “CertainTeed paver,” you may actually be looking at roof-related products or at a paver supplied under a different brand that a prior installer used. Before we quote anything, we confirm what’s physically on your driveway. That means lifting one edge unit, reading the stamp or mold mark on the underside, and measuring thickness – most residential pavers are 2⅜ inches (60 mm), and some older units are 2¼ inches. Thickness and unit dimensions dictate what will sit flush with your existing field.
The compatibility gotcha: replacement units have to match both the surface profile and the bedding depth of what’s already there. A paver that’s a quarter-inch thicker than its neighbors will rock, and a thinner one will sink. Color lot is the second issue – pavers fade in Southern California sun, and a fresh unit next to five-year-old ones reads as a patch even when the color code matches. We tell homeowners this up front so nobody is surprised.
On the OEM-versus-aftermarket question: a matching CertainTeed-compatible unit is the cleanest fix when the field is intact and you’re replacing a few pieces. When it isn’t available or the lot has shifted, a quality equivalent in the same thickness and a close profile is the practical answer. We source through recognized trade brands – Belgard and Unilock among them – and we’ll tell you plainly which option we recommend and why. We also work with KraftMaid, Cambria and Silestone on interior projects, if your remodel crosses over.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
- Sand washing out of the joints. Polymeric sand that keeps disappearing points to water moving under the pavers rather than over them. In Huntington Beach, where a lot of driveways slope toward the garage, that usually means the base wasn’t pitched correctly.
- Rutting or depressions where tires sit. This is a base failure – too little compacted aggregate or subgrade that wasn’t prepped. The pavers are fine; what’s under them isn’t.
- Lipped or rocking units. One paver sitting proud of its neighbors means bedding sand has shifted or a unit is the wrong thickness. Left alone, the edges chip and the problem spreads.
- Hairline cracks along a unit. Cracks that run with the grain of the paver usually trace to a point load over an unsupported spot. Cracks that spider outward often mean the base is moving.
- Efflorescence – the white chalky haze. That’s salt migrating out of the concrete, common in coastal Huntington Beach air. It’s cosmetic most of the time, but recurring blooms can signal moisture trapped in the base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway and paver work actually costs in Huntington Beach. These are installed prices, meaning materials, base prep, labor and cleanup are in the number.
- Targeted paver repair (a few units, re-sand, re-set): $700 – $3,200
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation (if you’re weighing options): $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement (full tear-out and rebuild): $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
What moves the range: square footage, how much base has to be excavated and re-compacted, whether the drainage has to be corrected, and how many units are salvageable. A repair that re-uses most of your field costs far less than a rebuild. You get a written price before any work starts, and that price is the price on the invoice. The work carries the 365-Day Done Right Promise – if it fails inside the guarantee period, we come back and fix it at no charge, and that’s in writing.
DIY or Call Us?
Some checks are safe to do yourself. You can sweep sand back into joints, note where water pools after rain, and pull one loose edge paver by hand to look at the base beneath it. What you shouldn’t tackle alone is excavation and re-compacting a driveway base – improperly compacted aggregate is the single most common reason pavers settle again within a year, and a driveway is a load-bearing surface under a few thousand pounds of car.
Where DIY usually goes wrong is the base. Homeowners re-set a sunken paver, tamp it by hand, and it’s back down within a season because the subgrade underneath was never addressed. The second mistake is skipping a proper edge restraint, which lets the field spread. Since this is a driveway and not a garden path, it’s worth having a professional assess what’s happening under the surface before you spend a weekend on it. Call (888) 329-8145 and we’ll tell you honestly whether it’s a repair or a rebuild – estimates are free.
FAQs

A well-installed paver driveway should hold up 25 to 30 years or more, but the pavers aren’t the weak link – the base is. In coastal Huntington Beach, salt air and seasonal rain are harder on the joints and base than on the concrete units themselves, so re-sanding every few years matters. Call (888) 329-8145 for an assessment.
Often, yes. If the failure is limited to a few units or one settled area, we can lift, re-set and re-sand just that section and re-use the rest of the field. A full replacement makes sense when the base has failed across most of the driveway or the units are badly spalled. We’ll tell you which applies. Call (888) 329-8145 for a free estimate.
A targeted repair is usually a one- or two-day job. A full paver driveway install typically takes three to five days, depending on square footage and how much base prep is needed – and we give you a real arrival window, not a vague “sometime Tuesday.” Call (888) 329-8145 to schedule your estimate.
We identify your existing unit by its stamp, dimensions and thickness, then source a compatible replacement through recognized trade brands – we don’t claim to keep parts on a truck. You’ll see exactly what’s being used and the written price before we start. Estimates are free; call (888) 329-8145.
Call (888) 329-8145 for your free estimate. A live person answers around the clock, and every job comes with a written price up front and the 365-Day Done Right Promise behind it.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












