A Penhallow company - serving Huntington Beach, CA
An open living room and dining area after a whole-home remodel
Boral · Huntington Beach

Boral Windows & Doors in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Huntington Beach Owner’s Guide

If you have a Boral window or patio door that’s fogged, jammed, leaking, or missing a screen, we can source the replacement part and install it for you. Most single window and door part replacements in Huntington Beach run $300 – $1,200 installed, and a full window replacement starts around $4,500 and climbs to $15,000 for a whole-house package. We work with Boral-compatible windows and doors and can usually get a tech out within a few days of your call.

Call (888) 329-8145

Homeowners here tend to spot the failure the same way. A sliding patio door starts dragging on one corner in late spring, so you give it a shove and it closes. By August it’s catching so hard you’re lifting the handle to get it shut. Or a dual-pane window on the west side of the house fogs between the glass after a hot, dry Santa Ana week, and no amount of wiping helps because the seal is already gone. The part was failing for months before you noticed.

Key Takeaways

  • Boral window and patio door parts aren’t universal. The right part depends on the series, the year, and the exact frame dimensions on your unit.
  • Fogged glass, dragging rollers, and failed weatherstripping are the three most common failures we see on Huntington Beach homes.
  • Coastal salt air and inland heat work on Boral products differently. Parts that hold up in a dry climate can corrode here in a few years.
  • We’re an independent service provider. We’re not affiliated with Boral, but we know the product line and can match replacement parts to your unit.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Which Boral Models This Applies To

Boral has made window and door systems under several product families over the years, and the part you need depends entirely on which one is sitting in your wall. The most reliable way to identify your unit is the manufacturer label, usually a sticker on the top or side of the window frame, inside the jamb of a sliding door, or on the sash edge. That label carries a series code and a date of manufacture, and those two pieces of information are what any parts lookup hinges on. If the label is gone, we measure the frame opening, the sash dimensions, and the roller or hinge pocket directly. Those three measurements can identify most Boral units even without a label.

Here’s the compatibility gotcha that catches people: Boral’s sliding patio door roller assemblies changed pocket dimensions between production runs, so a roller that fits a 2008 unit won’t seat in a 2014 unit even though the doors look identical from across the room. Ordering by photo or by “it looks the same” is how homeowners end up with a part that won’t go in. We confirm the pocket depth and the roller height before we order.

On OEM versus aftermarket: Boral-branded replacement parts are the safest match for moving hardware like rollers, glides, and lock mechanisms. For glass units and weatherstripping, a quality aftermarket equivalent often works just as well and costs less. We’ll tell you which parts we’d insist on OEM for and which ones a good equivalent handles fine, and we put that in writing before we order anything.

Signs Your Boral Windows & Doors Is Failing

Nearly every failure we see in Huntington Beach falls into one of five categories. If you’re seeing any of these, the part is already on its way out and the longer you wait, the more the surrounding frame takes a beating.

  • Fogging or condensation between the panes. The seal on the insulated glass unit has failed, letting moisture in. The glass itself isn’t broken; the seal is, and resealing won’t fix it once the desiccant inside is saturated.
  • Dragging or sticking sliding door. The roller assembly has worn flat or the track has debris and corrosion in it. On coastal Huntington Beach doors, salt air accelerates both, which is why we see this failure in years rather than decades on units facing the ocean.
  • Water intrusion at the sill or corners. Failed weatherstripping, a cracked glazing bead, or a seal that’s dried out from UV exposure. Left alone, water gets behind the frame and into the wall, and the repair grows from a $200 weatherstrip job into a carpentry job.
  • A window that won’t stay open or won’t latch. The balance or the lock mechanism has worn out. These are small parts, but a window that won’t latch is an entry point and a security issue, and a window that won’t stay up is a drop hazard.
  • Rattling or whistle in the wind. Worn glides, a loose sash, or gaps in the frame seal. This one gets worse quietly, and by the time you hear it clearly the frame has usually started to shift.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Pricing for Boral window and door work in Huntington Beach depends on the part, the labor, and how much surrounding repair the failure has already caused. Here’s what we see most often:

Work Typical Installed Range
Single part swap (roller, lock, glazing bead, weatherstrip) $300 – $1,200
Insulated glass unit replacement (fogged window) $400 – $900 per window
Full window replacement $4,500 – $15,000
Impact window installation (whole house) $8,000 – $25,000

What drives the range: the series and vintage of the unit, whether the glass has to be custom-cut, how much trim and stucco has to come off and go back on, and whether we’re dealing with one bad window or a whole side of the house. Every job gets a written price before we start. No change orders at the door, no surprise line items after demo day. If we quote you a number, that’s the number on the invoice. Every repair also carries a written guarantee, and the 365-Day Done Right Promise means if the part fails inside a year, we come back and make it right at no charge.

DIY or Call Us?

A whole-home remodel with the living, dining and kitchen areas opened up

You can safely check several things yourself. Wipe the track and look at the roller under a sliding door with a flashlight. Run your hand along the weatherstrip and see if it’s cracked or flattened. Look for fogging between the panes (that’s a seal failure, not a cleaning problem). Measure the frame opening and write it down. All of that is easy, and it helps us quote faster.

Where DIY goes wrong on this part: replacing the insulated glass unit and resetting rollers or balances on a window that’s already out of square. A glass unit is heavy and brittle and a dropped one is a hazard, and a window that’s torqued wrong after a roller swap will drag again in a month. That’s the repair that cracks again six weeks later. The other call to make early is water intrusion. If you’ve got visible moisture in the wall, stop and call us before you touch anything.

Call (888) 329-8145 and a real person picks up, any hour. We’ll look at the photos, confirm which Boral part you need, and give you a written price before we order anything.

FAQs

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 329-8145
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Penhallow Remodeling Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch