







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Home Additions & ADU: The Huntington Beach Owner’s Guide
We build Quikrete-compatible home additions and ADUs in Huntington Beach, and installed projects typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, with the written number given before any work starts. When owners call us about Quikrete on a project like this, it’s rarely the product itself that fails. It’s the substrate under it, the base prep, or a mix that was measured by eye instead of by spec. Quikrete is a brand of bagged concrete, mortar, grout, and repair mixes, not a single part with a serial number, so the work here is matching the right Quikrete mix to the right stage of an addition or ADU build. We’ve done that match on jobs across Huntington Beach, from the inland tracts near Adams Avenue to the lots closer to the water where salt air and marine moisture change how fast a mix cures.
Which Quikrete Models This Applies To

Quikrete sells by product family, not by model number. The ones that matter on an addition or ADU are Concrete Mix (the 80 lb. bag most footings and slabs start with), Sand/Topping Mix, High Strength Concrete Mix, Fast-Setting Concrete, Mortar Mix (Type N and Type S), Vinyl Concrete Patcher, and the Non-Shrink Precision Grout line used under posts and anchors. Each bag carries a mix ratio and a cure time printed on the back. That label is the part identification. If the bag is torn or faded, the mix is a guess, and on structural concrete a guess is how you end up with a footing that cracks at 90 days.
Where the OEM-versus-aftermarket decision gets real is at the edges. Quikrete’s own High Strength and Fast-Setting lines are formulated to a spec you can read and match. A generic store-brand concrete mix often isn’t. On a Huntington Beach ADU slab, the difference shows up in compressive strength and in how the mix behaves in our coastal humidity, where a slower set can mean a weaker cure. We specify the Quikrete line to the stage of the build rather than grabbing whatever bag is closest, and we write the mix spec into the quote so there’s no swap on day one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Home Additions & ADU Is Failing
These are the symptoms we hear about on Huntington Beach projects. Each one points to a different stage of the mix and placement.
- Hairline cracks spreading across a slab or patio within the first year. Usually a cure problem: the mix dried too fast in dry Santa Ana wind conditions or wasn’t kept damp during the set. Fast surface drying pulls the concrete apart from the inside.
- Crumbling or dusty surface on a finished slab. Often an over-watered mix or a topping that was applied too thin. Quikrete’s topping products need a minimum depth, and skimping on it leaves a surface that wears away under foot traffic.
- Posts or anchors that work loose over a season. A sign the non-shrink grout under the anchor wasn’t mixed to the label ratio. Under-set grout shrinks and the anchor loses its grip, which shows up as a wobble before it shows up as a failed post.
- Mortar joints cracking between block or brick on an addition wall. Usually Type N mortar used where Type S was needed, or the wrong water ratio on a hot day. The joint opens, water gets in, and the wall face starts to spall.
- Patched concrete lifting or peeling off a driveway apron or step. The patch didn’t bond because the existing surface wasn’t prepared or the patcher was applied over a damp, dirty slab. Quikrete’s vinyl patcher needs a clean, roughened surface to hold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

On this page, the “part” is the Quikrete material inside a larger addition or ADU project, so the honest price is the installed project range, not a bag price. For Huntington Beach, home additions typically run $45,000 – $130,000, ADU construction $90,000 – $220,000, and garage conversions $30,000 – $80,000. The number moves with square footage, foundation type, whether the ADU is detached or attached, and how much site prep the lot needs.
| Project | Installed Range (Huntington Beach) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What’s included on our side: the Quikrete mix spec written into the quote, the material, the labor, and the clean-up. What pushes the price up: a slab that needs engineered footings, a lot with drainage work, or an ADU that requires a separate utility trench. We give the written price before work starts, and the number on day one is the number on the invoice. Every project carries the 365-Day Done Right Promise, so if the work fails inside the guarantee period we come back and fix it at no charge.
DIY or Call Us?
Some things you can check yourself. Read the Quikrete bag label to confirm the mix you have, measure a crack width with a coin or a feeler gauge, and note whether a slab surface is dusty or sound by dragging a screwdriver across it. That’s information, and it helps us price the job.
Where DIY goes wrong on an addition or ADU is at the structural stage. Mixing concrete to spec, keeping a slab damp during cure in Huntington Beach’s dry spells, and setting anchors with non-shrink grout are all things a bag label can’t teach in an afternoon. A footing that cures weak fails later and costs more to fix than it would have to pour right. We’re an independent service provider, not affiliated with Quikrete, and we’d rather tell you that plainly than sell you a shortcut. Call (888) 329-8145 for a free estimate and we’ll tell you what your project actually needs.
FAQs

A properly mixed and cured Quikrete concrete footing or slab should hold up for decades. The failure point is almost always placement and cure, not the bag. Coastal humidity near the beach slows the set, and dry inland heat speeds it up, so the mix needs to be matched to the conditions on the day. Call (888) 329-8145 for an exact quote on your project.
Sometimes yes, if the underlying slab is sound and only the topping has failed. A vinyl patcher over a clean, prepared surface can buy years. If the slab itself is cracked through or the footing is weak, a patch is a bandage and the real fix is structural. We’ll tell you which one you’re looking at after we see it.
A garage conversion typically runs several weeks to a few months, and a full detached ADU takes longer because of foundation, utilities, and inspection stages. The schedule depends on your lot and the permit timeline in Huntington Beach, and we give you a written arrival window and a defined schedule before work starts, not a verbal ballpark.
We specify the Quikrete line to the stage of the build and source it for the job, then write the mix spec into your quote so there’s no substitution once work begins. We don’t carry stock or inventory, and we don’t claim to. We also work with recognized trade brands like KraftMaid, Cambria, and Silestone for the finishes that go on top of the build.
Call (888) 329-8145 for a free estimate. A live person answers 24/7, your technicians are background-checked and arrive in uniform, and you’ll get a written price before any work starts, backed by the 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












