







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Huntington Beach Owner’s Guide
If you have a failed paving stone, a settled drive edge, or a joint that keeps washing out, we install and repair Unilock driveway and paver systems throughout Huntington Beach. A full paver driveway installation typically runs $7,000 – $18,000 here, and a targeted repair of a single failed course or a settled apron usually lands well below that. We are an independent service provider, not affiliated with Unilock, so we match the correct series, thickness, and joint system to what is already on your drive.
Most Huntington Beach owners discover the problem after a winter rain or a close look at the apron. A paver lifts a half-inch. Sand starts moving toward the gutter. A joint you swept full two seasons ago opens up again. Those small movements are how failing Unilock paver and base systems announce themselves, and catching them early is far cheaper than a full replacement.
Which Unilock Models This Applies To

Unilock pavers for driveways fall into several families, and each one has its own thickness, joint design, and replacement rules. Our crews have up to 22 years of experience working with these systems, and the first thing we do on any repair is confirm exactly which product we’re matching.
Brussels Block and Brussels Dimensional: These are the most common Unilock driveway pavers in coastal Orange County. Brussels Block uses a traditional 60mm profile; Brussels Dimensional runs thicker and is meant for heavier traffic. If your drive carries RVs or you want a deep base, Dimensional is the right match, but its thickness means a mixed repair course won’t sit flush with a Brussels Block field.
Elegance and Umbriano: These larger-format pavers read as a clean, modern driveway and are popular on newer Huntington Beach builds. Their tight joints mean a single cracked paver is more visible than it would be on a textured field, and their size means replacement requires a careful lift without disturbing adjacent units.
Beacon Hill and Treo: Textured, heavier profiles often used on sloped driveways and long aprons where grip matters. Beacon Hill’s deep surface texture masks wear well but makes color matching a fresh piece to a three-year-old drive trickier.
To identify your product, measure a paver’s face dimensions and thickness, note the joint gap, and look for the imprint on the bottom of a loose unit. Bring a photo and the measurement to your first call. We’ll confirm the series before we quote, because a mismatched paver looks wrong forever. If we can’t source an exact current-line match, we’ll tell you the honest options: a discontinued colorway, a complementary accent, or a deliberate accent band.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Paver heaving or rocking: A paver that moves underfoot loses its base support, usually because water reached the bedding sand. On Huntington Beach drives, the culprit is often a flat grade with poor drainage or a clogged edge restraint.
- Sand washing out of joints: Joint sand migrates when the joint itself has widened. If you’re re-sanding the same spot every year, the base is allowing movement, not the sand itself.
- Edge and apron settlement: The curb-side edge of a drive takes the most load from tires and the most water from the street. When the edge drops, water pools against the house-side base and the whole apron starts to fail.
- Cracked or chipped pavers: Impact damage from a dropped weight, a plow, or a heat-stressed piece causes surface spalling. A single cracked paver is usually a one-piece fix; a cluster of cracks points to base failure underneath.
- Efflorescence that returns: A white salt haze that fades and re-appears is moisture creeping through the system. In coastal Huntington Beach humidity, persistent efflorescence on the same stones usually means water is trapped in the base.
Replacement Cost & What’s Included

For Huntington Beach, here are the ranges we quote, and they’re the same numbers you’ll see across the site:
- Paver driveway installation: $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Driveway replacement (full demolition and repour/repave): $5,000 – $14,000
- Driveway sealing: $250 – $700
What drives the number: square footage, base depth (coastal clay and sandy soils can require more excavation and compacted base), edge restraints, drainage changes, and whether we’re matching an existing Unilock field or laying a new one. Every quote is written, line-item, and given before we lift a paver, with no change orders after demo. The Kingswell Guarantee backs it: the number on day one is the number on the invoice, plus the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a lot yourself. Walk the drive after rain and note where water pools. Pull a loose paver with a putty knife and look at the bedding sand underneath. Measure a paver and photograph the imprint. Those observations make our quote more accurate and save you money.
Where DIY goes wrong on paver systems: resetting a paver without fixing the base is a temporary fix that fails on the next rain, and a new edge restraint installed wrong turns one settled corner into a whole course that lifts. Base prep, compaction, and edge restraint are the parts that fail silently and the parts homeowners most often skip. If a course is moving, if water is pooling against the house, or if the failure keeps returning to the same spot, the honest call is a professional one. Call (888) 329-8145 and we’ll talk through what you’re seeing before we quote anything.
FAQs

A properly installed Unilock paver system typically lasts 20 to 30 years in this climate, and often longer with reasonable maintenance. Coastal humidity slows freeze-thaw damage but accelerates efflorescence, so joint sand and sealing matter more here than in drier parts of the state.
Often yes, and it’s usually the smarter move. One failed course, a settled apron, or a handful of cracked pieces can be lifted and reset with fresh base and matching pavers, which costs a fraction of a full replacement. We tell you when a repair will hold and when the base failure runs too deep to patch.
A targeted repair of a course or apron typically finishes in a day or two, depending on the size of the area and how much base needs reworking. A full driveway reinstall usually runs a handful of working days, plus cure and finish time. We give you a defined arrival window and a written timeline before we start.
We confirm your series by face measurement, thickness, and the imprint on a loose unit, then order through an authorized supplier. We source materials from recognized trade brands, including Unilock, so we can get the correct current-line replacement. If your colorway has been discontinued, we say so and show you the best available match or an intentional accent option.
Other Brands We Also Service
Alongside Unilock pavers, our Huntington Beach remodel work includes KraftMaid, Cambria, and Silestone products for the interior projects that often sit next to a driveway or patio upgrade.
Get a Free Estimate
Call Penhallow Remodeling Huntington Beach at (888) 329-8145 for a free estimate on your Unilock driveway or paver project. A real person answers the phone around the clock, we give you a written price before any work starts, and the 365-Day Done Right Promise stands behind the result. Every technician is background-checked and arrives in uniform, and it’s all part of The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












