A Penhallow company - serving Huntington Beach, CA
An open living room and dining area after a whole-home remodel
M
Mr-Glass · Huntington Beach

Mr-Glass Windows & Doors in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Windows & Doors: The Huntington Beach Owner’s Guide

We install and service Mr-Glass windows and doors for homeowners across Huntington Beach, and most of those jobs land in the $4,500 – $15,000 range for standard replacement window work, or $8,000 – $25,000 when you step up to impact-rated glass. We’re an independent service provider, not affiliated with Mr-Glass, so we match the right part to your existing unit rather than pushing a brand. Most owners find us the same way: a sash that won’t latch, a fogged pane they can’t see through, or a slider that’s been dragging for months and finally jumped its track.

Call (888) 329-8145

Mr-Glass covers a lot of product lines, and the part you need depends entirely on which series you have. Get that wrong and you’ll be returning a perfectly good part that doesn’t fit.

Which Mr-Glass Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Mr-Glass windows and doors break down into a few families that matter for parts: single-hung and double-hung vinyl units, horizontal sliders, casement and awning styles, and sliding patio doors. Each uses different hardware, different balances, and different glass specs. A dual-pane sealed unit from a slider is not interchangeable with one from a casement even when they look similar, because the spacer depth and the frame rabbet differ.

To identify your unit, start with the etched label in the upper corner of the glass or on the frame. Those markings carry a manufacturer code and often a series identifier. If the label is gone, measure the visible glass, the frame width, and the sash thickness at the edge, then photograph the hardware up close. Those three measurements usually narrow it to the right part family.

On the OEM-versus-aftermarket call for Mr-Glass specifically: OEM sealed units match the original glass spec exactly, which matters most for impact-rated units where the assembly is certified as a whole. Aftermarket balances, rollers, and locks from reputable hardware makers are a solid match for most standard vinyl units and cost less. For impact glass in Huntington Beach homes, we recommend staying OEM on the glass itself.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Windows & Doors Is Failing

These are the symptoms that come up most often when we’re called out to a Huntington Beach address. Each points to a specific part, not just general wear.

  • Fog or condensation between the panes. The seal on the insulated glass unit has failed and moisture is trapped inside. This is a glass replacement, not a cleaning job, and it gets worse with the salt air along the coast.
  • The sash won’t stay up, or drops when you let go. Broken or stretched spiral balances or a snapped constant-force balance. A balance that fails on one side usually means the other side is close behind it.
  • The slider drags or jumps the track. Worn rollers or a bent track. Huntington Beach’s windblown sand works into the bottom track over time and grinds the rollers down faster than most homeowners expect.
  • The lock won’t catch or the handle turns loose. Worn lock hardware or a misaligned keeper. On sliding doors this is often an adjustment, not a replacement, so it’s worth checking before you buy a part.
  • Drafts or daylight around the edges. Failed weatherstripping or a sash that’s out of square. Vinyl frames expand and contract through the year, and a unit installed a bit tight can pull away from the seal.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Here’s how the numbers break down for Huntington Beach homeowners, with parts and labor included:

Job Installed Price Range
Window replacement (standard) $4,500 – $15,000
Impact window installation $8,000 – $25,000
Single sealed glass unit (dual-pane) Priced per unit, quoted on site
Balance, roller, or lock hardware swap Priced per unit, quoted on site

The range depends on how many units, the glass spec, and whether the frame needs work. Every job comes with a written price before we start, so the number on day one is the number on the invoice. Parts and labor are broken out clearly, and the work carries our 365-Day Done Right Promise in writing. If something fails inside that window, we come back and fix it at no charge.

DIY or Call Us?

Some of this you can safely check yourself. Look at the etched label, test whether the lock catches, clean and inspect the bottom track, and see if a sash that binds loosens with an adjustment screw. Those are low-risk and tell you a lot.

Where DIY goes wrong is the glass itself and anything requiring the sash to be removed. Sealed glass units are heavy and fragile, and impact-rated units are heavier still. A dropped sash or a mis-seated sealed unit can crack, break a frame corner, or fail the seal within weeks. We’d rather you not risk a finger or the glass learning that the hard way. Call us at (888) 329-8145 and we’ll tell you honestly whether you need a part swap or a full unit.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

How long do Mr-Glass windows and doors last? A well-installed vinyl Mr-Glass unit typically runs 15 – 25 years, but sealed glass units often fail sooner in coastal air. Expect a fogged pane somewhere between 10 and 15 years in Huntington Beach, where salt and sun work on the seals.

Can the part be repaired instead of replaced? Often, yes. A dragging slider is usually a roller or track adjustment, and a stubborn lock may just need a keeper reset. Sealed glass that has already fogged can’t be repaired, only replaced, because the spacer and desiccant are sealed inside.

How long does the swap take? A hardware swap like a balance or roller is a same-visit job, usually under an hour per window. A sealed glass unit replacement takes a bit longer, and full window replacement depends on the count and the frame condition. We give you a written time estimate before we start.

How do you source the Mr-Glass part? We match the etched code or, if it’s gone, the measurements and hardware photos to the correct part family. We’re not affiliated with Mr-Glass, so we source from the right channel for your specific series and tell you upfront whether OEM or a quality aftermarket equivalent is the better call.

We also handle KraftMaid, Cambria, and Silestone work for homeowners who are remodeling around a window or door in the same project.

If you’ve got a Mr-Glass window or door that’s misbehaving in Huntington Beach, call (888) 329-8145 for a free estimate. We’ll give you a written price, a real arrival window, and a guarantee in writing before any work starts.

Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 329-8145
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Penhallow Remodeling Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch