







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Huntington Beach Owner’s Guide
We install and repair ES Windows-compatible roofing components for Huntington Beach homes, typically running $8,000–$20,000 for a full roof replacement and $400–$1,800 for a targeted repair. Most Huntington Beach owners discover the failure after a winter storm pushes water past a tired flashing boot or a lifted shingle edge, and they find the ES Windows label on the vent or skylight frame while cleaning up the leak. What follows is what we’ve learned working on these systems in coastal salt air, and how to get the right part matched to your specific installation.
Key Takeaways:
- Roof replacements in Huntington Beach run $8,000–$20,000; repairs $400–$1,800.
- Parts must match your ES Windows series and frame dimensions, not just the brand name.
- Salt air and marine layer accelerate corrosion on coastal Huntington Beach roofs.
- The 365-Day Done Right Promise covers every installation we complete.
Which ES Windows Models This Applies To

ES Windows makes several product lines that appear on Huntington Beach homes, and the roof-related components vary by series. The window and skylight frames, vent boots, and flashing kits are matched to specific frame profiles and rough opening dimensions, so grabbing a part by brand alone is a common and expensive mistake. Before we order anything, we photograph the manufacturer label on the interior jamb, measure the rough opening, and check the frame extrusion profile against ES Windows’ spec sheets.
Here’s the gotcha that trips up most Huntington Beach owners: ES Windows changed frame extrusions between production runs, so two units that look identical from the outside can require different flashing kits. We’ve seen a homeowner order a replacement boot that fit an older series but left a 3/8-inch gap on a newer frame, and that gap was enough to let water in during the next rain. If your label is faded or missing, we measure the frame and match the profile rather than guessing by sight.
On OEM versus aftermarket: for ES Windows parts that carry a structural or watertight function, we lean toward OEM or a certified equivalent. For cosmetic trim or standard boots where the dimensions match exactly, a quality aftermarket part is a reasonable choice and saves money without compromising the seal. We’ll tell you which category your part falls into and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
Huntington Beach sits close enough to the water that salt-laden air speeds up corrosion on metal flashing and fasteners, and the marine layer keeps roof surfaces damp longer than inland areas. These conditions show up in specific symptoms:
- Water staining on the ceiling or interior jamb. Moisture is getting past the flashing or boot seal, usually at a corner where the sealant has cracked from thermal cycling. Huntington Beach’s warm days and cool nights work sealant loose faster than most owners expect.
- Visible rust or corrosion on flashing and fasteners. Salt air corrodes galvanized steel and untreated fasteners, and once rust starts at a seam, the seal breaks down. This is the most common failure we see in Huntington Beach properties within a mile or two of the beach.
- Lifted, cracked, or missing shingles around the roof penetration. Wind and sun dry out the shingle mat around the ES Windows frame, and once the shingle edge lifts, water can wick underneath. A cracked shingle at the penetration is often the first thing that fails.
- Daylight or draft visible at the frame-to-roof joint. If you can see light around the skylight or vent frame from inside, the flashing or seal has separated. That gap will leak in the next rain.
- Water pooling or soft spots on the roof deck near the frame. A soft spot means the decking under the part has absorbed water and the wood is compromised. This needs attention before any new part goes on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Huntington Beach, a targeted roof repair around an ES Windows penetration runs $400–$1,800, while a full roof replacement involving these components is $8,000–$20,000. Tile roof repair on these penetrations runs $600–$2,500, and metal roof installation (where an ES Windows system is being integrated into a new metal roof) runs $15,000–$40,000. The range is driven by roof pitch, material type, whether the decking needs repair, and how accessible the penetration is.
Here’s what the written price before any work starts includes: the matched part (OEM or quality equivalent, noted on the quote), labor, removal and disposal of the failed component, and any flashing or sealant needed to make the joint watertight. We list the part and the labor as separate line items so you can see exactly where the money goes.
Every repair carries our written guarantee plus the 365-Day Done Right Promise. If something fails inside the guarantee period, we come back and fix it at no charge, and the free return visit means no service call fee for a re-inspection. That’s backed in writing on the project.
DIY or Call Us?
Some checks are safe for an owner: photographing the ES Windows label, measuring the rough opening from inside, and noting where the leak appears after a rain. Those details help us match the part before we arrive.
Here’s where DIY goes wrong on ES Windows roofing parts. Roof work means height, and on a Huntington Beach two-story or a steep-pitch roof, a fall can be serious. Climbing around a roof penetration to reseal a flashing boot or replace a frame is not a weekend job, and we’ve seen homeowners make the leak worse by trapping moisture under a new bead of caulk. The flashing detail on these ES Windows penetrations has to lap in the right order, or water finds the same path again. We’re not going to hand you a step-by-step for that. Better to have a trained professional handle it.
If you want a second set of eyes before deciding, call us at (888) 329-8145 for a free estimate. We’ll tell you whether it’s a $400 repair or something bigger, and give you a written number before any work starts.
FAQs

A well-installed ES Windows roof component typically lasts 15–25 years, but coastal Huntington Beach conditions shorten that. Salt air and the marine layer accelerate corrosion on flashing and fasteners, so many of these parts fail in 10–15 years near the beach unless the flashing is stainless or a corrosion-rated metal. Call (888) 329-8145 for an exact quote.
Often yes. A cracked boot seal or a small flashing gap can be repaired for $400–$1,800, and that’s the range we aim for before recommending a full replacement. If the part itself is sound and the seal is the only failure, a repair makes sense. If the frame or decking is compromised, replacement is the honest answer. Call (888) 329-8145 for a free estimate.
A targeted repair around an ES Windows penetration usually finishes in a few hours, while a full replacement involving the roof takes longer, often a full day or more depending on size. We give you a written arrival window and a defined scope before work starts. Call (888) 329-8145 to schedule your free estimate.
We source ES Windows components by matching your unit’s model label, frame profile, and rough opening dimensions, and we order through ES Windows or a certified aftermarket supplier, never a brand-name guess. We don’t carry parts on a truck or keep a local stock, so the correct part is ordered to your spec. We’re an independent service provider, not affiliated with ES Windows. Call (888) 329-8145 for a free estimate.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












