A Penhallow company - serving Huntington Beach, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Moen · Huntington Beach

Moen Kitchen Remodeling in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Kitchen Remodeling: The Huntington Beach Owner’s Guide

If you’re remodeling a Huntington Beach kitchen and want Moen fixtures worked into the plan, we handle the install. A full Moen kitchen remodel in Huntington Beach typically runs $14,000 – $45,000, depending on layout, cabinet line and countertop material. That includes the Moen faucet and fixture install itself, along with everything else the project touches: cabinets, counters, backsplash, plumbing connections, and the finish work that makes it all look built-in instead of bolted on. We’re an independent remodeling company, not affiliated with Moen. We just install their products often enough to know what holds up in a coastal kitchen and what doesn’t.

Call (888) 329-8145

Most owners don’t start out looking for “Moen kitchen remodeling.” They start with a specific problem. The pull-down sprayer head on a Moen faucet stops retracting. A cartridge drips at the base of the spout. Or a faucet that was fine for years suddenly needs a part that’s discontinued. That’s usually the moment a small repair turns into a bigger conversation about the whole kitchen. We get it. When one thing fails after ten years, the cabinets and counters around it are often ready for attention too.

Which Moen Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Moen makes a wide range of kitchen faucets, and the part you need depends entirely on which line you have. The most common families in Huntington Beach kitchens are the Arbor, Brantford, and Motionsense pull-down lines, plus older single-handle models that have been installed since the 1990s. Each uses a different cartridge or valve assembly, and they are not interchangeable. A 1225 cartridge fits many single-handle faucets; a 1255 fits a different set; the pull-down sprayer assemblies have their own part numbers entirely. Getting the wrong one is the single most common mistake we see.

To identify your model, look for a label under the sink or on the mounting shank, or check the base of the faucet for an etched model number. If there’s no label, the cartridge itself usually has a number stamped on it once you remove the handle. That said, pulling the handle to read the cartridge is exactly the kind of step where a homeowner can strip a set screw or crack a plastic retainer clip. We’d rather you call and describe the faucet than risk damaging it.

On OEM versus aftermarket: Moen’s own replacement parts are the safest match, especially for anything inside the valve body. Quality aftermarket cartridges exist and can work fine, but we’ve seen cheap ones fail within a year in Huntington Beach’s hard water. The mineral content here is tough on rubber seals. For a part that’s going to sit behind a wall or under a sink for the next decade, we source the OEM version. It costs a little more and saves a callback. We don’t stock parts and we don’t carry them on a truck. When we quote a Moen fixture install, the part is ordered to spec for your model.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Kitchen Remodeling Is Failing

These are the symptoms that tell us a Moen fixture or the kitchen around it is due for attention. Each one points to a specific cause, and catching it early usually means a smaller job.

  • The faucet drips at the spout when shut off. That’s a worn cartridge or valve seat, the most common Moen failure we see. In Huntington Beach’s hard water, mineral buildup accelerates the wear, so a cartridge that lasts fifteen years inland might go in ten near the coast.
  • The pull-down sprayer won’t retract or hangs loose. The retraction weight or the hose guide has failed. On Motionsense models, the hose can also develop a kink that shortens its life. This is a small part, but it’s annoying every single day.
  • Water pools at the base of the faucet. A failed O-ring or base seal lets water seep under the fixture. Left alone, that moisture works into the countertop cutout and can soften the substrate around the sink.
  • The handle feels loose or gritty when you turn it. The cartridge is binding or the retaining nut has backed off. Gritty movement usually means mineral deposits inside the valve, which get worse the longer you wait.
  • You’re planning a remodel and the existing Moen fixture is older than the cabinets. If the kitchen is getting new counters and a new sink, reusing a fifteen-year-old faucet is a false economy. The fixture is often the cheapest line item in the project and the one you touch most.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled living room with built-in shelves around the fireplace

Here’s what Moen-related kitchen work runs in Huntington Beach. These are installed prices, parts and labor together, and they’re the numbers we put in writing before any work starts.

Project Installed Price Range
Full kitchen remodel (Moen fixtures included) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range on a Moen kitchen remodel: the cabinet line (KraftMaid and Wellborn both factor in), the countertop material (Cambria, Silestone and Caesarstone all sit at different price points), whether the layout changes, and whether plumbing has to move. A straight fixture swap inside an existing kitchen costs a fraction of a full remodel, and we’ll tell you honestly which one your situation calls for.

Every job gets a written price before work begins. The number on day one is the number on the invoice. Our technicians have up to 22 years of experience, they’re background-checked and they arrive in uniform. The work carries our 365-Day Done Right Promise: if something we installed fails inside the year, we come back and fix it at no charge.

DIY or Call Us?

Some things you can safely check yourself. You can look for the model label under the sink, confirm whether the faucet drips from the spout or from the base, and note whether the sprayer retracts. You can also shut off the supply valves and see if the drip stops. That’s information that helps us quote accurately.

Where DIY goes wrong: pulling a cartridge out of a Moen valve body. The retaining clip is small and easy to lose down the drain, the cartridge can seize in place after years of mineral buildup, and forcing it can crack the valve housing, which turns a part swap into a faucet replacement. We’ve been called to more than one Huntington Beach kitchen where a homeowner got the clip out and couldn’t get the new cartridge seated. That’s a ten-minute fix for a trained technician and a two-hour headache for anyone else.

If you’re planning a larger change, like new counters with a Moen faucet to match, call us at (888) 329-8145 for a free estimate. We’ll give you a written price and a real arrival window. A live person answers the phone any hour.

FAQs

A single-story rear room addition with tall windows and a new patio

How long does a Moen kitchen faucet last? A well-made Moen faucet typically lasts 10 – 15 years before the cartridge needs replacing, though Huntington Beach’s hard water can shorten that to around 8 – 12. The finish usually outlasts the internal parts. Call (888) 329-8145 for an exact quote on a replacement, and estimates are free.

Can the part be repaired instead of replaced? Often yes. If the faucet body and finish are in good shape, a cartridge or sprayer assembly swap fixes most drips and retraction problems. We’ll tell you when a repair makes sense and when the fixture is far enough along that replacement is the better spend. Call us for a written quote either way.

How long does the swap take? A straightforward cartridge or sprayer replacement is usually a short visit, often under an hour once we’re on site. A full faucet replacement tied to new counters or a sink runs longer because it involves the countertop cutout and supply lines. We give you a real window, not a vague “sometime today.”

How do you source the Moen part? We order OEM parts matched to your specific Moen model, which means we confirm the model number first rather than guessing. We don’t keep parts in stock or carry them on a truck. If a part is on backorder, we tell you that up front and give you the timeline before you commit. Call (888) 329-8145 and we’ll walk through it with you.

Whether you need a single Moen fixture installed or a full kitchen remodel in Huntington Beach, the first step is the same: a free estimate with a written price you can hold us to. We also work with KraftMaid, Cambria and Silestone on the cabinetry and countertop side. Call (888) 329-8145 any time. A real person picks up.

Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A built-in window seat in a bay windowAn open living space after a whole-home remodelA finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA freestanding soaking tub in a remodeled primary bathroomA whole-home remodel with the living, dining and kitchen areas opened up

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 329-8145
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Penhallow Remodeling Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch