







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Huntington Beach Owner’s Guide
We install bathroom remodels built around Wellborn cabinetry and Wellborn-compatible components, and a full bathroom remodel in Huntington Beach typically runs $9,000 – $28,000 installed, depending on layout, cabinet line, and whether we’re moving plumbing. If your Wellborn vanity has a failing component, we can usually identify the right replacement and schedule the work within a normal project window. Owners here don’t usually notice a problem until a drawer stops gliding, a door hangs crooked, or water starts working its way into the cabinet base under the sink. By the time the symptom shows on the surface, the cause has often been working quietly for months.
Key takeaways:
- Wellborn bathroom cabinetry fails in predictable ways: glides, hinges, drawer boxes, and the substrate behind the vanity top. Each has a different fix and a different price.
- Most Huntington Beach bathroom remodels with Wellborn cabinetry fall between $9,000 and $28,000, with cabinet work itself a defined line item in your written quote.
- We write the price before any work starts, back the work with our 365-Day Done Right Promise, and answer the phone 24/7 with a live person.
Which Wellborn Models This Applies To

Wellborn makes bathroom cabinetry across several lines, and the part you need depends on which line your vanity came from. Wellborn’s bathroom vanities generally fall into the company’s value and mid-tier series, with a standard vanity depth of 21 inches rather than the 24-inch depth used in kitchens. That difference matters: a drawer box or glide ordered for a kitchen cabinet won’t fit a 21-inch-deep bathroom vanity, and this is the single most common ordering mistake we see in Huntington Beach. Wellborn’s bathroom cabinet drawers and rollout trays are built to the shallower vanity depth.
Before you order anything, find the label inside the cabinet. Wellborn typically affixes a manufacturer label to the inside of a drawer box or the back panel of the cabinet, showing the series and finish. If the label is gone, measure the drawer box: width, depth, and the height of the box side. Measure the door hinge cup diameter and the overlay (how far the door sits over the cabinet face). A 35mm hinge cup with a 1/2-inch overlay is a common specification, but confirm your own measurement rather than assuming.
OEM versus aftermarket comes down to tolerance. Wellborn’s own glides and hinges are matched to their drawer boxes and door drilling patterns, so OEM parts fit without adjustment. Quality aftermarket equivalents (Blum, Grass, and similar hardware makers) can outperform OEM parts in some cases, but only if the mounting holes and drawer box construction match. We confirm compatibility before ordering rather than hoping a universal part drops in. For vanities with adjacent cabinetry or countertops, we also handle Cambria, Silestone, and Caesarstone tops and can match the bathroom counter to a kitchen we’ve worked on, and we service KraftMaid cabinetry as well.
Penhallow Remodeling Huntington Beach is an independent remodeling company, not affiliated with Wellborn.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Bathroom Remodeling Is Failing
- Drawer glides that stick or skip. The nylon rollers or steel ball bearings inside the glide wear flat after years of daily use, and in Huntington Beach’s coastal humidity the metal tracks can corrode and bind. If the drawer pulls unevenly or feels gritty, the glide is failing, not the drawer box.
- A door that hangs and rubs. Hinge screws work loose or the hinge itself wears at the pivot. In salt-air conditions close to the beach, plated hinge hardware corrodes faster than inland, and a door that was flush two years ago starts catching the frame.
- Soft-close that slams. The damper inside a soft-close hinge or glide loses its seal. Once the hydraulic fluid escapes, the mechanism stops cushioning and the door or drawer closes hard, which accelerates wear on the hinges.
- A drawer box that pulls apart at the joint. The dovetail or dowel joints loosen when the cabinet absorbs moisture, often from a slow under-sink leak or a bathroom that stays steamy. If the box wobbles in the glide, both the box and the glide may need attention.
- Swelling or soft spots at the cabinet base. The frame or the substrate behind the vanity top takes on water from an under-sink drip or a failed caulk line. This is the symptom you don’t want to ignore, because water damage spreads into the surrounding wall before you see it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full bathroom remodel in Huntington Beach runs $9,000 – $28,000. A smaller bathroom can often be done for $5,000 – $12,000. If the work is cabinetry and component replacement within an existing layout, a bathroom vanity installation falls in the $800 – $3,000 range. Shower and tub work carries its own line items: a walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, and a shower replacement is $3,000 – $8,500.
What drives the number up or down: whether we’re moving plumbing, the cabinet line and finish, the countertop material, and how much of the existing wall and substrate has to come out and go back in. Every quote is written and line-itemed before work starts, so the number on day one is the number on the invoice. Our 365-Day Done Right Promise covers the work: if something fails inside the guarantee period, we come back and fix it at no charge. If a repair fails, we come back for a free second visit, no service call or re-inspection fee.
| Item | Huntington Beach Price Range |
|---|---|
| Bathroom remodel (full) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
DIY or Call Us?
Some checks are safe and worth doing yourself. You can find the Wellborn label inside the drawer box, measure the drawer box and hinge cup, and look for soft spots or swelling at the cabinet base. Those steps cost nothing and tell you what part you’re dealing with.
Installation of glides, hinges, drawer boxes, and especially any work behind the cabinet that involves water, electrical, or wall substrate is where DIY goes wrong. Vanities in Huntington Beach bathrooms frequently house electrical outlets, GFCI receptacles, and sometimes light switches inside the cabinet, and cutting into a wall or cabinet to fit a new part can contact live wiring or hidden plumbing. An incorrectly set drawer box or a badly aligned hinge also shortens the life of the new part. When a repair involves anything behind the cabinet face, we recommend a trained professional. We’re background-checked, uniformed, and we call before we come. Call (888) 329-8145 to schedule your free estimate.
FAQs

Wellborn’s glides and hinges typically serve 10 to 15 years of normal bathroom use, but the coastal humidity in Huntington Beach can shorten that for metal hardware that isn’t regularly wiped dry. Soft-close dampers often fail sooner, around 5 to 8 years, and the first sign is a door that no longer eases shut. Call (888) 329-8145 for an exact quote on replacing the failing part; estimates are free.
Sometimes. A loose hinge can be re-seated in sound wood with the right anchors, and a drawer box with a separated joint can sometimes be reglued and reclamped if the wood isn’t swelled. Glides and soft-close dampers that have lost their internal mechanism can’t be repaired and should be replaced. We’ll tell you which applies once we see it. Call for a free estimate and we’ll give you the written price before any work starts.
A single glide, hinge, or drawer box replacement usually takes under an hour on site, and a full vanity or cabinet replacement typically runs a few days depending on countertop lead time. We schedule within a normal project window and give you a real arrival window, not an all-day guess. Call (888) 329-8145 to schedule your free estimate.
We identify the series and specs from the cabinet label and your own measurements (drawer box dimensions, hinge cup size, overlay), then match the part to that specification before ordering. Where an OEM part isn’t available or a quality aftermarket equivalent fits better, we confirm compatibility before we commit. We don’t carry stock, so every part is confirmed to your cabinet. Call (888) 329-8145 for a free estimate.
Whether you’re looking at a single failing glide or a full Huntington Beach bathroom remodel, the first step is the same: a written price before any work starts, a real arrival window, and a guarantee you can hold us to. Our technicians bring up to 22 years of experience, and a live person answers the phone 24/7. Call (888) 329-8145 for your free estimate.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












