







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Huntington Beach Owner’s Guide
A full bathroom remodel in Huntington Beach typically runs $9,000 – $28,000, and a smaller bath with modest footprint lands between $5,000 and $12,000. If we’re reusing or matching existing KraftMaid cabinetry and boxes, the cabinet portion of that number can come down further, though demolition, plumbing, tile and the labor to set everything back square are what drive the total. The tricky part is scheduling: this kind of work is planned, not emergency, so we book a real arrival window and give you a written price before anyone swings a hammer.
Most owners discover the KraftMaid issue the same way. A drawer glides sideways instead of straight, a door sags a half-inch at the hinge, or the finish on a vanity front blisters near the sink after one humid summer in Sunset Beach. The part itself is almost never the whole problem; the substrate behind it, or the way it was set during the original install, usually started the chain of failure.
Which KraftMaid Models This Applies To

KraftMaid builds cabinet families across a wide range of series, and the parts underneath differ in dimension even when the face looks identical. A drawer box from one series will not swap cleanly into another, and the door hinges vary between overlay and full-overlay configurations. Where we see most owners order the wrong piece is on the hinge side: KraftMaid uses several proprietary hinge plates, and a generic European-style replacement will bolt on, then pull out of the frame within a season because the plate holes don’t align with the original screw pattern.
The right way to identify the part is to pull the drawer out completely and look for the label stapled to the underside of the box or the back of the door. That label lists the series and the cabinet width. If it’s gone (it happens on older installs around Huntington Beach more than you’d expect), measure the interior opening, the drawer box depth, and the hinge plate hole spacing in millimeters. Those three numbers will match your part to the correct replacement every time.
The OEM-versus-aftermarket call depends on the piece. For hinges and drawer slides, a quality aftermarket equivalent (Blum, Grass, Hettich all make compatible mechanisms for KraftMaid boxes) is genuinely fine and often cheaper. For anything face-frame or finish-matched, we go OEM, because a color and sheen mismatch on a KraftMaid vanity front is visible across the bathroom. Without being affiliated with KraftMaid, we source their parts through authorized channels and confirm the series before ordering.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
- The drawer glides unevenly or sticks halfway. This is usually a worn slide rail, but on KraftMaid boxes it can also mean the box itself has swelled from moisture wicking into the bottom panel. Pull the drawer and check whether the bottom is flat or bowed.
- A door hangs low at the far edge. That’s a hinge plate that’s lost its grip on the cabinet frame, often from repeated opening stress. On a vanity that gets opened every morning and night, the screws work loose over a few years, not decades.
- The finish peels or blisters around the sink. Coastal Huntington Beach humidity and daily splash at the sink edge drive finish failure faster than in inland markets. Once the finish lifts, moisture gets behind it and the box below starts to go soft.
- Water stains or a soft spot inside the cabinet floor. A slow supply-line leak under the sink will rot the cabinet bottom before you notice a puddle. By the time the stain shows, the substrate is usually compromised and the part alone won’t fix it.
- Doors that no longer sit flush when closed. KraftMaid doors are precisely milled, so a door that warps or twists usually points to a swollen frame or a cabinet box that was never set level. New hinges won’t correct a twisted box.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Detailing out the numbers for a Huntington Beach bathroom remodel: the full range runs $9,000 – $28,000 depending on footprint, cabinet line and countertop material (Cambria quartz and Silestone are popular and add to the top of that range; Kohler and Moen fixtures sit comfortably mid-range). Where we’re replacing a specific failed KraftMaid part rather than remodeling the room, the parts-plus-labor line is much smaller, and we quote it separately so you can see exactly what the swap costs. Cabinet installation on a bathroom vanity typically lands $4,000 – $13,000, and a standalone vanity install runs $800 – $3,000.
Every number we give you is written down before work starts, so the figure on day one is the figure on the invoice. If we pull the old part and find the substrate is gone, we tell you before we proceed, not after. The 365-Day Done Right Promise covers every job in writing: if something we touched fails within that year, we come back and make it right at no charge, and there’s no service-call fee on a return visit.
DIY or Call Us?
Some of this you can absolutely handle yourself. Pulling a drawer and checking the label, measuring the hinge plate spacing, or wiping down a cabinet floor to see whether the stain is surface or through-the-board are all safe, useful diagnostics. What goes wrong for Huntington Beach owners is the swap itself, particularly on a vanity that’s plumbed in: shut off the water and disconnect the supply, sure, but then you’re pulling a cabinet box off a wall that may have a slow leak behind it, tile to reset, and supply lines that need to be re-seated properly or you’ll be mopping for a week.
If the cabinet floor is soft, if the frame has swollen, or if the door isn’t sitting flush because the box is out of level, that’s a job for us. Call (888) 329-8145 and we’ll give you a written estimate on the swap, with a real arrival window, background-checked uniformed technicians, and a live person on the line every hour of the day.
FAQs

How long does a KraftMaid part last? A drawer slide in a bathroom vanity generally lasts 8 – 12 years under normal use, though coastal humidity at Huntington Beach cuts that closer to 6 – 10 in practice, since the repeated moisture cycling we see near the beach accelerates wear on the box itself. When a slide or hinge fails before its time, the underlying cause is usually moisture, not the part. Call (888) 329-8145 for a free estimate on a proper replacement.
Can the existing part be repaired instead of replaced? Sometimes, yes. A loose hinge plate can often be re-seated with a screw-hole repair insert if the frame is still solid, and a sticking slide can sometimes be cleaned and lubricated back to working order. Once the box has swollen or the finish has lifted, replacement is the honest call because a repair won’t address the moisture that caused it. Estimates are free; call (888) 329-8145.
How long does the swap take? A single drawer slide or hinge replacement is a short visit, usually under an hour of labor. A full drawer box or door replacement is longer because we’re matching the part to your series and confirming the fit before we install, and we’ll give you a written time window, not a vague “sometime Tuesday.” Call (888) 329-8145 to schedule yours.
How do you source the KraftMaid part? We confirm your series from the cabinet label or your measurements, then order through authorized KraftMaid channels so the part matches the original spec. If the label is missing, we measure and cross-reference. We don’t carry stock on a truck, so every part is ordered specifically for your cabinet. Call (888) 329-8145 with the cabinet width and we’ll quote the part and the labor together.
Written by the team at Penhallow Remodeling Huntington Beach, serving Huntington Beach and nearby areas.












