







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Huntington Beach Homeowners Choose Mr-Glass Construction
Penhallow Remodeling Huntington Beach is an independent Mr-Glass service provider offering construction repair and installation for Mr-Glass shower enclosures, mirrors, shelving, and vanity glass across Huntington Beach. What sets our Mr-Glass work apart is coastal-specific: we service these enclosures in salt air and marine-layer humidity every week, so we know exactly which hinges corrode, which seals shrink, and which glass panels are worth saving. We’re not affiliated with or authorized by Mr-Glass, which means our repair-or-replace recommendation follows what the glass actually needs, not a warranty script. Call (888) 329-8145 for a free estimate.
Why Trust Penhallow Remodeling Huntington Beach for Your Mr-Glass Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent on frameless and semi-frameless glass enclosures, the kind Mr-Glass builds. We know the difference between a 3/8-inch panel that can be re-hung on new pivot hardware and a 1/2-inch panel whose edge chips have already compromised the temper. We know which hinge series Mr-Glass used across production runs, which OEM hinge kits are still available, and which have been discontinued in favor of aftermarket equivalents that fit the same drill pattern.
That familiarity matters for warranty-safe service. When we replace a hinge, seal, or sweep on a Mr-Glass enclosure, we match the original mounting points so the glass isn’t re-drilled and the panel’s structural integrity stays intact. We don’t drill new holes in tempered glass. We don’t substitute a hinge that changes the door’s swing geometry. And when a repair genuinely isn’t the right call, we say so plainly rather than billing for a fix that won’t hold.
Every job comes with a written price before any work starts and the 365-Day Done Right Promise in writing, so if a hinge we installed loosens or a seal we set starts weeping inside the guarantee period, we come back and make it right at no charge. That’s The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Huntington Beach
Huntington Beach sits right on the marine layer, and that salt air does specific things to glass hardware. Here’s what we actually see on Mr-Glass products in this town:
- Corroded pivot hinges on frameless enclosures. The hinge and pivot hardware on Mr-Glass 1/2-inch and 3/8-inch frameless enclosures corrodes and loosens in coastal salt air. When the pivot pin seizes and the hinge body works loose from the wall, the door starts to sag and bind against the frame or the opposite glass panel. Left alone, that bind puts stress on the door’s edge, which is where tempered glass is most vulnerable.
- Dried and shrunken seals on sliding doors. Factory-applied seals and sweeps on Mr-Glass semi-frameless sliding shower doors dry out, shrink, and start leaking within a few years, especially on south-facing exposures where sun and heat cycle the vinyl harder. A leak at the bottom of a sliding door is almost always a worn bottom guide plus a hardened sweep, not a failed pan.
- Edge chips on tempered panels. Tempered glass panels develop edge chips from door slam or cleaning tool impacts. A chip on the edge of a tempered panel is a delayed shatter risk: the panel can look fine for months and then let go all at once. Any edge chip on a shower door or fixed panel needs to be looked at before the enclosure is put back in service.
- Desilvering on custom mirrors. Mirror backing or adhesive fails in high-humidity bathrooms, leading to desilvering and dark edges on Mr-Glass custom mirrors and mirror wraps. Once the silvering starts to lift at the edge, it spreads inward and no polish brings it back. The fix is replacement, usually with a moisture-tolerant backing and a sealed edge.
- Loose glass shelving and vanity tops. Mr-Glass glass shelving and vanity tops work loose when the original clips or adhesive give way in a damp bathroom. A shelf that shifts under load or a vanity top that rocks on its cabinet needs re-securing before the glass takes a stress crack.
Worth knowing for Huntington Beach owners: a frameless door that sags slowly over a year is usually a hinge problem, not a glass problem. The panel itself is often fine. That distinction is the whole repair-versus-replace question in one sentence.
Mr-Glass Parts & Our Repair-vs-Replace Approach

We source OEM-grade replacement hinges, seals, and sweeps for Mr-Glass enclosures when those parts are available. We don’t claim to stock Mr-Glass parts locally. Each job’s hardware is sourced for that job, which means we’re honest about lead time rather than promising a part we don’t have. When OEM parts are discontinued or priced out of proportion to the job, we use high-quality aftermarket glass and hardware that matches the original mounting pattern.
The repair-versus-replace call comes down to three things: the condition of the glass edges, whether the original hinge pattern can be reused, and whether the enclosure’s layout still works for the bathroom. If a $150 hardware kit buys you years on a sound panel, we’ll tell you that. If the glass is chipped at the edge or the enclosure has shifted far enough that re-alignment won’t hold, we’ll tell you that too. We never push replacement when a repair is the right call.
If you’re not sure which side of that line your Mr-Glass enclosure is on, call (888) 329-8145 and we’ll talk it through before anyone comes out.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check the glass first, every time. Edge chips, temper marks, and panel alignment get inspected before we touch hardware, because a chipped panel changes the whole recommendation. Then we look at hinges, pivots, seals, and sweeps against the Mr-Glass model and series.
- 2
Repair or install. For a repair, we replace the failed hardware with OEM-grade or matched aftermarket parts, reusing the original mounting points so the glass isn’t re-drilled. For a new install, we set the enclosure to the bathroom’s actual walls and floor, not to a nominal dimension, because older Huntington Beach bathrooms are rarely square.
- 3
Test. We open and close the door through its full swing, check for bind, run water against the seals, and confirm the sweep actually sheds water to the inside of the shower. No handoff until it tests clean.
- 4
Warranty. You get a written guarantee on every repair, plus the 365-Day Done Right Promise. If it fails inside the guarantee period, we come back and fix it at no charge. No service call fee, no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Huntington Beach
We work on the full Mr-Glass range: Frameless Shower Enclosures in 1/2-inch and 3/8-inch glass, Semi-Frameless Sliding Shower Doors, Custom Mirrors and Mirror Wraps, and Glass Shelving and Vanity Tops. On the installation side, that covers walk-in shower installation, frameless glass shower enclosures, and bathroom vanity installation, plus the glass shelving and mirror work that finishes a bathroom. If your Mr-Glass product isn’t on that list, call and describe it. Most likely we’ve seen it.
We Also Service These Brands
Mr-Glass is one brand in a full bathroom and kitchen scope. We also work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler and Moen fixtures, alongside James Hardie siding on the exterior side. That breadth means your Mr-Glass enclosure can be matched to the rest of the bathroom in one written scope instead of three separate contractors.
FAQs – Mr-Glass Construction Service in Huntington Beach

No. We’re an independent Mr-Glass service provider and we’re not affiliated with or authorized by Mr-Glass. That independence is deliberate: it lets us recommend a repair or a full replacement based on what the glass actually needs rather than on a manufacturer’s warranty script. Call (888) 329-8145 for a free estimate.
We use OEM-grade replacement hinges, seals, and sweeps for Mr-Glass enclosures when they’re available, and high-quality aftermarket glass and hardware when OEM parts are discontinued or overpriced. We source parts per job rather than stocking them, so we’ll give you an honest lead time. Call (888) 329-8145 and we’ll tell you what your specific enclosure needs.
Most hardware repairs, like a hinge replacement or a sweep and guide refresh, are a single visit once the parts are in hand. A full enclosure replacement or a new walk-in shower installation runs longer and depends on glass lead time and the bathroom’s condition. We give you a written schedule with the price before work starts. Call (888) 329-8145 to get that estimate moving.
We cover Mr-Glass Frameless Shower Enclosures in 1/2-inch and 3/8-inch glass, Semi-Frameless Sliding Shower Doors, Custom Mirrors and Mirror Wraps, and Glass Shelving and Vanity Tops. That includes repair, hardware replacement, and new installation. Call (888) 329-8145 if you’re unsure which series you have; we can usually identify it from a photo.
Independent service can affect a manufacturer warranty, and we won’t pretend otherwise. We work warranty-safe where we can: we reuse the original mounting points, avoid re-drilling tempered panels, and match the original hardware spec so the enclosure stays structurally as built. We’ll tell you plainly if a repair choice could affect your Mr-Glass coverage before we start. Call (888) 329-8145 to talk it through.
Mr-Glass glass work in Huntington Beach runs across a real range depending on scope. Here’s what our written pricing looks like:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Frameless Glass Shower Enclosure (part of Walk-In Shower Installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
A hardware-only repair sits well below the low end of these ranges, and we’ll quote it separately once we’ve seen the glass. Call (888) 329-8145 for an exact quote. Estimates are free.
Book Your Mr-Glass Service in Huntington Beach, CA
Whether it’s a sagging frameless door, a leaking sliding enclosure, or a mirror that’s started to desilver, we’ll look at the glass and give you a written price before any work starts. Our technicians are background-checked and arrive in uniform. Call (888) 329-8145 for a free estimate on your Mr-Glass service in Huntington Beach.
Written by the team at Penhallow Remodeling Huntington Beach.












