







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Huntington Beach Homeowners Choose CWS Construction
Penhallow Remodeling Huntington Beach provides independent CWS construction service in Huntington Beach: cabinet installation and refacing, quartz and granite countertops, and full kitchen remodeling using CWS Woodstar, Statesville, Expressions, Advantage, and Newport and Hartford door styles. What makes our CWS work different is measurement discipline – cabinet runs leveled before templating, box cores verified before doors go back on, and a written price before anything is ordered. We are an independent CWS service provider. We’re not affiliated with or authorized by CWS, and we don’t imply otherwise. Call (888) 329-8145 for a free estimate.
Why Trust Penhallow Remodeling Huntington Beach for Your CWS Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent inside CWS cabinets – hanging Woodstar and Statesville doors, replacing swollen drawer boxes in Advantage and Expressions runs, and re-templating countertops over face frames that have moved. That familiarity matters because CWS is a measurement-driven product. A door that rubs or a seam that opens is almost never a “bad cabinet” problem; it’s a level, moisture, or templating problem, and the fix starts there.
We use CWS OEM doors, drawer boxes, hinges, and touch-up finish where the original line is still supported. Where OEM is discontinued, we specify quality aftermarket soft-close hardware (Blum or equivalent) rather than whatever fits. Every job starts with a written price, not a range on a napkin, and every project carries our 365-Day Done Right Promise in writing: if the work fails inside the guarantee period, we come back and fix it at no charge. That’s our standard under The Kingswell Way – say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
Technicians are background-checked and arrive in uniform on every job. A live person answers the phone 24/7 – not a voicemail prompt.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Huntington Beach
Most Huntington Beach kitchens sit close enough to the water that marine-layer humidity and salt air become the deciding factor in how a CWS cabinet run ages. Here’s what we see most often:
- Doors and drawer fronts swelling or delaminating at the bottom rail. The all-wood Newport and Hartford door styles are solid products, but a beach-close kitchen puts them in constant humidity cycling. Finish blisters first near the sink and dishwasher, then the rail itself softens. It’s not a defect in the door – it’s moisture finding the end grain.
- Particleboard and MDF box cores wicking under sinks and at dishwasher cutouts. Once a box core takes on water, fastener pull-out follows. Screws stop biting, hinges sag, and the door drags. This is the single most common CWS cabinet failure we’re called to.
- Face-frame joints and toe-kick seams opening after slab movement. The postwar tract homes across Surf City were built on slabs and pier-and-beam foundations that have had sixty-plus years to settle. When the floor moves and the cabinets don’t, joints open at the toe kick and the face frame racks out of square.
- Countertop seams and edge profiles failing. A CWS quartz or granite slab installed without proper templating over an out-of-level cabinet run will telegraph every high spot. Seams spread, edge profiles crack, and the slab rocks on the run beneath it. Correct templating fixes this – a thicker seam doesn’t.
- Hinges installed for a drier climate. Older hardware on Statesville and Advantage runs wasn’t specified for Pacific air. Corrosion on the hinge plate and screws is often the first visible symptom, well before the door shows any trouble.
We also see salt-air corrosion on fasteners and exterior hardware in beach-close homes, which is why we spec hardware rated for coastal conditions whenever it’s available in the OEM line.
CWS Parts & Our Repair-vs-Replace Approach

We don’t stock CWS parts locally, and we won’t tell you otherwise. Parts are sourced per job – OEM doors, drawer boxes, hinges, and touch-up finish where the original line is still supported, and quality aftermarket soft-close hardware where it isn’t. That sourcing takes a few days, so a CWS repair isn’t a same-day proposition. It’s a correct one.
Our repair-vs-replace call leans honest. If the box is sound and the issue is worn fronts, tired hinges, or a door that needs re-hanging, repair is the right answer and it’s far less expensive. Replacement makes sense when a box core has swollen past its structural integrity, or when a run has been cut down and remodeled so many times it won’t hold a new fastener. We tell you which one applies before the work starts.
Call (888) 329-8145 for a free estimate on cabinet installation, countertop work, or a full kitchen remodel.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We check the face-frame and box integrity before touching finishes. Moisture at the bottom rail, fastener bite at the hinge plate, and out-of-level runs get measured, not guessed at. Then we write a price.
- 2
Repair or install. Swollen boxes come out. OEM doors and drawer boxes go back on if the line is supported. Hinges get upgraded to adjustable soft-close where that’s the honest fix. On a full install, we level the run before anything hangs.
- 3
Test. Doors open and close across their full swing without rubbing. Drawers run without dragging. Countertops sit flat on the run with seams tight. We run every cabinet through the full motion before we call it done.
- 4
Warranty. The written guarantee is in your hand before we leave. If a repair fails inside the 365-day period, we come back. There’s no service call and no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Huntington Beach
We work across the CWS cabinet and countertop lines installed in Huntington Beach homes: Woodstar and Statesville framed cabinets, the Expressions and Advantage all-wood series, and the semi-custom Newport and Hartford door styles. On surfaces, we install and service the CWS quartz and granite countertop programs – templated, seamed, and edged to fit the cabinet run they sit on. That covers the boxes, the doors, the hardware, the countertop, and the finish, all from one line. When a Huntington Beach kitchen needs the run leveled or the countertop re-templated, that work falls inside the same job.
We Also Service These Brands
Because we’re independent, we can specify CWS boxes and doors alongside KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures without steering you toward any one brand’s warranty program. That flexibility matters when a Huntington Beach kitchen has CWS cabinets on one wall and a different line on another, or when you’re weighing a reface against a full re-box.
FAQs – CWS Construction Service in Huntington Beach

No. We’re an independent CWS service provider, not affiliated with or authorized by CWS. That independence lets us specify CWS, KraftMaid, Cambria, or Silestone based on your kitchen, not on a brand’s warranty program. Call (888) 329-8145 for a free estimate.
Yes, wherever the original CWS line is still supported. We use OEM doors, drawer boxes, hinges, and touch-up finish for Woodstar, Statesville, Expressions, Advantage, and Newport or Hartford runs. Where OEM is discontinued, we use quality aftermarket soft-close hardware such as Blum rather than whatever happens to fit, and we tell you which is which before the work starts.
It depends on the repair. A box replacement or door re-hang on a single cabinet is typically a shorter job, while a countertop re-template or a full cabinet run install takes longer. Parts are sourced per job – we don’t stock CWS parts locally – so factor a few days for sourcing before scheduling. Call (888) 329-8145 and we’ll give you a written timeline with the price.
Woodstar and Statesville framed cabinets, the Expressions and Advantage all-wood series, the semi-custom Newport and Hartford door styles, and the CWS quartz and granite countertop programs. If you’re unsure which line you have, the door style and box construction are usually enough to identify it. Call (888) 329-8145 and we’ll sort it out.
It shouldn’t, if the service is done correctly with OEM parts where the line is supported. Independent service providers can’t extend a manufacturer’s warranty, and we don’t claim to. What we do offer is our own written guarantee on the work: if a repair fails inside 365 days, we come back and fix it at no charge, with no service call or re-inspection fee.
Ranges depend on scope. Cabinet installation typically runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, kitchen island installation $3,000 – $10,000, a small kitchen remodel $9,000 – $20,000, and a full kitchen remodel $14,000 – $45,000. Every homeowner gets a written price before any work starts. Call (888) 329-8145 for an exact quote – estimates are free.
Book Your CWS Service in Huntington Beach, CA
Penhallow Remodeling Huntington Beach handles CWS cabinet installation and refacing, quartz and granite countertops, and full kitchen remodeling for Huntington Beach homeowners. Written price before any work starts. Background-checked, uniformed technicians. 365-Day Done Right Promise in writing. Call (888) 329-8145 to schedule your free estimate – a live person answers 24/7.
Written by the team at Penhallow Remodeling Huntington Beach.












